Using this Instruction Booklet

You have just purchased a SAMSUNG microwave oven. Your Owner’s GB Instructions contain much valuable information on cooking with your

microwave oven:

Safety precautions

Suitable accessories and cookware

Useful cooking tips

At the front of the booklet you will find illustrations of the oven, and more importantly the control panel, so that you can find the buttons more easily.

The step-by-step procedures use two different symbols.

ImportantNote

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY

Failure to observe the following safety precautions may result in harmful exposure to microwave energy.

(a)Under no circumstances should any attempt be made to operate the oven with the door open or to tamper with the safety interlocks (door latches) or to insert anything into the safety interlock holes.

(b)Do not place any object between the oven door and front face or allow food or cleaner residues to accumulate on sealing surfaces. Ensure that the door and door sealing surfaces are kept clean by wiping after use first with a damp cloth and then with a soft dry cloth.

(c)Do not operate the oven if it is damaged until it has been repaired by a qualified microwave service technician trained by the manufacturer.

It is particularly important that the oven door closes properly and that there is no damage to the:

(1)Door, door seals and sealing surfaces

(2)Door hinges (broken or loose)

(3)Power cable

(d)The oven should not be adjusted or repaired by anyone other than a properly qualified microwave service technician trained by the manufacturer.

Safety Precautions

Important Safety Instructions.

Read Carefully and keep for future reference.

Before cooking food or liquids in your microwave oven, please check that the following safety precautions are taken.

1.DO NOT use any metallic cookware in the microwave oven:

Metallic containers

Dinnerware with gold or silver trimmings

Skewers, forks, etc.

Reason: Electric arcing or sparking may occur and may damage the oven.

2.DO NOT heat:

Airtight or vacuum-sealed bottles, jars, containers Ex) Baby food jars

Airtight food.

Ex)

Eggs, nuts in shells, tomatoes

Reason:

The increase in pressure may cause them to explode.

Tip:

Remove lids and pierce skins, bags, etc.

3.DO NOT operate the microwave oven when it is empty.

Reason:

The oven walls may be damaged.

Tip:

Leave a glass of water inside the oven at all times.

 

The water will absorb the microwaves if you accidentally set the

 

oven going when it is empty.

4.DO NOT cover the rear ventilation slots with cloths or paper.

Reason: The cloths or paper may catch fire as hot air is evacuated from the oven.

5.ALWAYS use oven gloves when removing a dish from the oven.

Reason: Some dishes absorb microwaves and heat is always transferred from the food to the dish. The dishes are therefore hot.

6.DO NOT touch heating elements or interior oven walls.

Reason: These walls may be hot enough to burn even after cooking has finished, even though they do not appear to be so. Do not allow inflammable materials to come into contact with any interior area of the oven. Let the oven cool down first.

7.To reduce the risk of fire in the oven cavity:

Do not store flammable materials in the oven

Remove wire twist ties from paper or plastic bags

Do not use your microwave oven to dry newspapers

If smoke is observed, keep the oven door closed and switch off or disconnect the oven from the power supply

4

Page 4
Image 4
Samsung M1734NCE, M1735NCE, M1713NCE technical specifications Using this Instruction Booklet, Safety Precautions, Do not heat

M1713NCE, M1734NCE, M1735NCE specifications

The Samsung M1734NCE, M1735NCE, and M1713NCE are advanced multifunction printers designed to cater to both office and home environments, combining efficiency, versatility, and high-quality output. These models exemplify Samsung's commitment to providing reliable printing solutions that meet the demands of modern users.

The M1734NCE and M1735NCE are laser printers that stand out due to their high-speed printing capabilities, producing documents at speeds of up to 28 pages per minute. The M1713NCE, also a laser model, offers comparable speeds, ensuring that users can handle large volumes of printing without a hitch. This speed is a crucial feature for busy workplaces, allowing for greater productivity while minimizing downtime.

One of the defining characteristics of these models is their exceptional print quality. With a maximum resolution of 1200 x 1200 dpi, the prints produced are sharp and vibrant, ideal for both text-heavy documents and color graphics. This high resolution ensures that every detail is rendered accurately, meeting the quality expectations of professional users.

The M1734NCE and M1735NCE are equipped with innovative technologies that enhance usability and efficiency. They feature automatic duplex printing, which significantly reduces paper consumption and costs, making them environmentally friendly choices. Additionally, both models support mobile printing options, allowing users to print directly from smartphones or tablets via NFC, Google Cloud Print, or other mobile printing applications, thereby ensuring seamless connectivity and convenience.

Another noteworthy feature is their compact design, which makes them suitable for various office spaces, even those with limited room. The ergonomic layout does not compromise the functionality, providing ample paper handling capabilities. They come with a sizeable input tray that can accommodate a range of paper sizes, simplifying the printing of diverse documents.

Samsung has also integrated energy-efficient technologies into these models. With features like Energy Star compliance and a low power consumption mode, users can expect reduced energy costs without sacrificing performance. Moreover, their easy-to-use interfaces, highlighted by intuitive control panels, ensure that even less tech-savvy users can navigate settings with ease.

In summary, the Samsung M1734NCE, M1735NCE, and M1713NCE are powerful, multifunctional printers that excel in speed, quality, and environmental friendliness. With their advanced features and robust capabilities, they are excellent choices for any user looking to enhance productivity and achieve professional-grade outputs.