SAFETY PRECAUTIONS (continued)

7.To reduce the risk of fire in the oven cavity:

◆Do not store flammable materials in the oven

◆Remove wire twist ties from paper or plastic bags

◆Do not use your microwave oven to dry newspapers

◆If smoke is observed, keep the oven door closed and switch off or disconnect the oven from the power supply

8.Take particular care when heating liquids and baby foods.

◆ALWAYS allow a standing time of at least 20 seconds after the oven has been switched off so that the tem- perature can equalize.

◆Stir during heating, if necessary, and ALWAYS stir after heating.

◆Take care when handling the container after heating. You may burn yourself, if the container is too hot.

◆A risk of delayed eruptive boiling exists.

◆To prevent delayed boiling and possible scalding, you should put a plastic spoon or glass stick into the bev- erages and stir before, during and after heating.

Reason : During the heating of liquids the boiling point can be delayed; this means that eruptive

boiling can start after the container is removed from the oven. You may scald yourself.

◆In the event of scalding, follow these FIRST AID instructions:

•Immerse the scalded area in cold water for at least 10 minutes.

•Cover with a clean, dry dressing.

•Do not apply any creams, oils or lotions.

◆NEVER fill the container to the top and choose a con- tainer that is wider at the top than at the bottom to pre- vent the liquid from boiling over. Bottles with narrow necks may also explode if overheated.

◆ALWAYS check the temperature of baby food or milk before giving it to the baby.

◆NEVER heat a baby’s bottle with the teat on, as the bottle may explode if overheated.

9.Be careful not to damage the power cable.

◆Do not immerse the power cable or plug in water and keep the power cable away from heated surfaces.

◆Do not operate this appliance if it has a damaged power cable or plug.

10.Stand at arm’s length from the oven when opening the door.

Reason : The hot air or steam released may cause scalding.

11.Keep the inside of the oven clean.

Reason : Food particles or spattered oils stuck to oven walls or floor can cause paint damage and reduce the efficiency of the oven.

12.“Clicking” sound might be noticed while operating, especially at defrosting mode.

Reason : When the electrical power output is chang- ing, you may hear that sound.

This is normal.

13.When the microwave oven is operating without any load, the power will be cut off automatically for safety. You can operate normally after letting it stand for over 30 minutes.

IMPORTANT SAFETY INSTRUCTIONS

During cooking, you should look into the oven from time to time when food is being heated or cooked in disposable containers of plastic, paper or other combustible materials.

IMPORTANT

Young children should NEVER be allowed to use or play with the microwave oven. Nor should they be left unattend- ed near the microwave oven when it is in use. Items of interest to children should not be stored or hidden just above the oven.

WARNING:

If the door or door seals are damaged, the oven must not be operated until it has been

repaired by a competent person.

WARNING:

It is hazardous for anyone other than a comperent person to carry out any service or repair operation which involves the removal of a cover which gives protection against exposure to microwave energy.

WARNING:

Liquids and other foods must not be heated in sealed containers since they are liable to explode.

WARNING:

Only allow children to use the oven without supervicion when adequate instructions have been given so that the child is able to use the oven in a safe way and understands the hazards of improper use.

Please recycle or dispose of the packaging material for this product in an environmentally responsible manner.

SAFETY 3

Page 2 Page 4
Page 3
Image 3
Samsung M1D8SCE, M198SCE owner manual Safety Precautions
Page 2 Page 4

M1D8SCE, M198SCE specifications

The Samsung M1D8SCE and M198SCE are standout memory solutions from a well-renowned leader in the semiconductor industry. Known for their high performance and reliability, these DRAM modules cater to a wide range of applications, including personal computing, gaming, and server environments.

Both M1D8SCE and M198SCE models are built using advanced manufacturing processes and technology, ensuring that they meet the demanding performance requirements of modern computing tasks. One of the key features of these memory modules is their compatibility with the latest DDR4 standards, providing enhanced data transfer rates and improved power efficiency. With a typical speed of 2400 MHz, users can expect reduced latency and increased bandwidth, which significantly improves overall system responsiveness and performance.

The M1D8SCE is particularly noted for its capacity to support dual-channel configurations, enhancing data flow between the memory and the CPU. This enables smoother multitasking and improved performance in memory-intensive applications such as video editing and 3D rendering. On the other hand, the M198SCE version targets high-capacity requirements with options that can reach up to 16GB per module, making it suitable for advanced gaming rigs and professional workstations.

Both models leverage Samsung's proprietary 3D NAND technology, which not only contributes to higher storage density but also enhances reliability and longevity. This technology minimizes the risk of data loss and corruption, critical for data-heavy operations. Additionally, the energy efficiency of these modules, with a typical operating voltage of just 1.2V, contributes to lower overall power consumption, making them an eco-friendly choice.

Furthermore, these memory modules are designed with thermal management in mind. The advanced heat spreader design aids in better heat dissipation, thereby ensuring stable performance even under heavy loads, which is essential for gamers and high-performance computing.

Overall, the Samsung M1D8SCE and M198SCE DRAM modules stand out in the market due to their cutting-edge technologies, robust performance characteristics, and reliability, making them an excellent choice for users looking to upgrade or build high-performance systems. With a clear focus on innovation and quality, Samsung continues to set benchmarks in the memory technology landscape.
Top Page Image Contents