Using Voice-Activated Dialing

Sprint Voice Signal uses built-in voice recognition software that allows you to say commands to perform common functions supported by your phone. There is no voice training required to use the voice recognition feature. You simply say the predesignated command displayed on your screen in a normal tone of voice to perform the desired function.

To activate voice recognition:

1.Press and hold . (The phone prompts you to “Say a command”.)

2.Wait for the beep and then say one of the following commands:

Call <Name or #>

Send Text <Name or #>

Send Email <Name>

Send Voice SMS <Name>

Lookup <Name>

Go To <App>

When it recognizes one of these commands, the phone takes the corresponding action. If the phone does not hear a command within approximately eight seconds, it deactivates voice recognition without taking any action.

144

Section 2H: Using Your Phone’s Voice Services

Page 174
Image 174
Samsung M510 manual Using Voice-Activated Dialing, To activate voice recognition, 144