Selecting a Stored Station

The PROGRAM function can be used to assign a new station to an existing program number.

You can also use PROGRAM/SET button on the remote con- trol to instead of MEMORY button in step 8.

Otherwise:

a Press MEMORY.

Result: The PRGM is displayed for a few seconds.

b Press TUNING Down and Up to assign a program number between 1 and 15.

c Press MEMORY to store the radio station.

Result: PRGM is no longer flashed and the station is stored. To store any other radio frequencies required, repeat Steps 3 to 8.

Turning the VOLUME knob on the front panel or

Pressing the VOLUME + or – buttons on the remote control 7 Select the FM stereo or mono mode by pressing MONO/ST.

8 If you do not want to store the radio station found, revert to Step 4 and search for another station.

To scroll through the frequencies faster when searching manually, hold down the TUNING Down or Up buttons.

The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode.

Adjust the volume by:

Checking or Changing Programmed CD Tracks

You can check or change your selection of tracks at any time.

1	Press	once if you have started listening to the selection.
2	Press PROGRAM.
	Result: The following indications are displayed:

(CH = Check, 01=Program No,CH 1 = Disc No, – – = Track No on the disc)

If you have already programmed 24 tracks, CH is displayed instead of PR when you press PROGRAM.

3 Press PROGRAM again.

Result: The first track selected is displayed, together with the letter CH (Change).

4	Press PROGRAM once or more times until the track to be changed is dis-
	played.
5	If necessary, press the corresponding DISC (1, 2, 3) button to change discs.
6	Press	and	or turn MULTI JOG to select a different track.
7	Press PROGRAM to confirm your change.
8	Press CD/MP3-CD (			) to start listening to the selection.


	Result: The first track selected is played.

		5
8
		6
6	1	6

	TIMER ON/OFF
	AI SLEEP	PROGRAM/SET		MEDLEY
	DISC SKIP	SHUFFLE		CD REPEAT
6	1 CD/MP3-CD			8	6
	VOLUME		TUNING/
	VOLUME		ALBUM
			ALBUM
DECK				TUNING
	1/2			MODE

+10

Searching for and Storing the Radio Stations

You can store up to:

15 FM stations 15 MW stations

Switch the system on by pressing STANDBY/ON.

Select the TUNER function by pressing TUNER.

Select the required frequency band by pressing TUNER (BAND) again on the front panel or TUNER (BAND) on the remote control. Result: The appropriate indication is displayed:

	FM	Frequency Modulation
	AM(MW)	Medium Wave
4
4	To search for a	Press TUNING MODE
	station...
	Manually	Once or more times until MANUAL
		is displayed.
	Automatically	Once or more times until AUTO is
		displayed.

Select the station to be stored by:

Turning the MULTI JOG knob to the right or to the left to increase or decrease the frequency respectively

Pressing TUNING or on the remote control

1	2,3			6
	2,3

				5
			7
				5,8
	CD/MP3-CD
	VOLUME		TUNING/
	VOLUME		ALBUM
	6		ALBUM
	DECK			TUNING
	1/2		5,8	MODE
			5,8	+10
				4
	6	TAPE		5,8
		TAPE

In Tuner mode

In manual tuning mode, you can use MULTI JOG or / button on the panel front to manual search a radio station.

During Tuner auto searching, press button to stop auto searching.

In Preset tuning mode, you can use MULTI JOG or / button on the panel front to search a stored radio station.

You can listen to a stored radio station as follows:

1	Switch the system on by pressing STANDBY/ON.
2	Select the TUNER function by pressing TUNER on remote control.
3	Select the required frequency band by pressing TUNER (BAND) on
	the remote control or TUNER (BAND) again on the front panel.
4	Press the TUNING MODE button on the front panel of the unit, or the
	TUNING MODE button on the remote control until “PRESET” is
	displayed.
5	Turning MULTI JOG on the front panel left or right until the desired