Samsung MAX-DA55T/FMC, MAX-DA54T/HAC, MAX-DA54T/MEA, MAX-DA54T/FMC manual Key Control Function

Connecting Headphones/Microphone

/Key Control

You can connect a set of headphones to your micro component system so that you can listen to music or radio programmers without disturbing other people in the room. The headphones must have a 3.5ø jack or an appropriate adapter.

You can also insert microphone to sing along with your favorite Cds.

	M				Y
					R
	O				O
	N			E	M
	O		M
	/
	S
	T
		SLEEP
PLAYBACK		REC/PLAY	2
1FULL LOGIC CONTROL	CD SYNCHRO RECORDING

	Connect the headphones	Plug a microphone with a 6.3ø MIC
	to the PHONES jack on	jack into the Mic terminal.
	the front panel.
• The loudspeakers are no longer used to		• Connect one or two Microphones.
output the sound.		• Turn the MIC LEVEL knob to adjust the MIC level.

• Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF.

Note

•Prolonged use of headphones at a high volume may damage your hearing.

Cautions on Handling and Storing Discs ENG

Small scratches on the disc may reduce sound and picture quality or cause breaks in playback. Be especially careful not to scratch discs when handling them.

Handling discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface.

Do not stick paper or tape on the disc.

Handling and Storing Discs

When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

•When cleaning, wipe gently from the inside to the outside of the disc.

Note • Condensation may form if warm air comes into contact with cold parts inside the player. When condensation forms inside the player, the player

may not operate correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours with the power on.

Key Control Function

Press the KEY CONTROL button to adjust the key of the music to your voice.

To use the Key control :

1.Insert a CD and plug a MIC into the MIC 1 terminal.

2.Press Stop on the main unit or remote to put the unit in Stop mode.

3.Press the Key Control button on the main panel or the KEY CONTROL #or b button to turn the Key control feature on. "Key Control On" will appear on the display.

4.Press Play to start CD playback, then press the KEY CONTROL # or b to adjust the key of the music.

To turn the Key control off, press the Stop button, then remove the Microphone.

MENU RETURN

ENTER

EXIT

SUB

AUDIOTITLE

KEY CONTROL

Precautions When Using Audio Cassettes

•Check that the tape in the cassette is sufficiently taut.

•To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive tape.

•When you have finished playing a cassette, always put it back in its case.

•Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high temperatures.

•Avoid using 120-minute cassettes as they place unnecessary strain on the tape mechanism.

Result: Each time the KEY CONTROL # or b button is pressed, the following			SLEEP	INFO
			SLOW
appears on the TV screen:	ZOOM	LOGO	MO/ST	REPEAT
				TIMER
b : Low-Pitched	P.SOUND	EQ	TIMER/CLOCK	ON/OFF
# : High-Pitched	TUNER MEMORY	DEMO
	P.SCAN	DIMMER	ECHO	REMAIN

and after several seconds, it will disappear.

•Each time # button is pressed, the key is increased, and each time b button is pressed, the key is decreased .

•The function can only be used with CDs(except DTS CD).

•The Key control function can only be used when a MIC is connected.

59

MISCELLANEOUS 60