Connecting Headphones 
/Microphone Function
DVD/CD | TUNER | AUX | USB |
| |
VOLUME |
|
|
|
|
|
AUX IN 1 | MIC1 | MIC2 |
| MIC VOL | ECHO |
Cautions on Handling and | ENG |
Storing Discs |
|
Small scratches on the disc may reduce sound and picture quality or cause breaks in playback. Be especially careful not to scratch discs when handling them.
Handling discs 
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface.
Do not stick paper or tape on the disc.
Handling and Storing Discs 
Connect the headphones to the PHONES jack on the front panel.
•The loudspeakers are no longer used to output the sound.
Plug a microphone with a 3.5ø MIC jack into the Mic 1 or 2 terminal.
•Connect one or two Microphones.
•Press the MIC
•Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF.
•MIC output is not available while HDMI AUDIO ON.
When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.
•When cleaning, wipe gently from the inside to the outside of the disc.
Note • Condensation may form if warm air comes into contact with cold parts 
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours with the power on.
Note |
•Prolonged use of headphones at a high volume may damage your hearing.
•HDMI AUDIO is turned OFF when headphones are connected.
•When CD Ripping, CD audio can’t be out.
MISCELLANEOUS
57 | 58 |
