Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connect the connecting jacks (2) to the back of
Connecting
to a TV
Please be sure to turn off the power and unplug the power cord before moving or installing this unit.
Please choose one of three video connection methods.
Make sure the polarities (+and
SPEAKERS OUT (6 
)
Method 1 Using Video Out (Good Quality)
1 Connect Video Out on the player to Video In on your TV.
2 Press the TV/VIDEO button on the remote
of TV control to set the TV to "VIDEO".
( supplied)
CONNECTIONS
Position of the DVD Player
•Place it on a stand or cabinet shelf, or under the TV stand.
Speakers L R
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Method 2 Using
Use this method if your TV has an S-Video In jack.
•Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
•Place the speakers so that their tweeters will be at the same height as your ear.
Directions in Installing Speaker
1 Connect
2 Press the TV/VIDEO button on the remote control of TV to set the TV to
(not supplied)
•Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.
•Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker.
•Do not take the speaker near from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality of the screen display.
Note |
•Composite Video: A single video signal that is a composite of the black-
•
9 | 10 |
