Viewing the Various Functions on Your | Setting the Clock | |
System | ||
|
GB
You can view the various functions available on your system.
1 Press the Demo button.
Result: The various functions available are listed in turn on the dis- play.
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate sec- tions.
2 To cancel this function, press Demo again.
Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock:
When you purchase the
After a power failure
After unplugging the unit
| Remember to reset the time when the clock changes from |
| winter to summer time and vice verse. |
| For each step, you have a few seconds to set the required options. |
| If you exceed this time, you must start again. |
|
|
1 | Switch the system on by pressing On/Standby. |
2 | Press Timer/Clock twice. |
| Result: CLOCK is displayed. |
3 |
4 |
5 |
6 |
7 |
Press Return only on the front panel.
Result: The hour flashes.
To... | Turn the Multi Jog knob to the... |
Increase the hours | Right |
Decrease the hours | Left |
When the correct hour is displayed, press Return only on the front panel.
Result: The minutes flash.
To... | Turn the Multi Jog knob to the... |
Increase the minutes | Right |
Decrease the minutes | Left |
When the correct time is displayed, press Return only on the front panel.
Result: The clock starts and is displayed, even when the system is in standby mode.
You can display the time, even when you are using another function, by pressing Timer/Clock once.
You can also use / buttons to instead Multi Jog knob in step 4, 6.
1 | 4,6 | 4,6 |
| 3,5,7 | |
|
| |
|
| 4,6 |
| 2 |
|
10