Samsung MAX-VL45 Video CD Player Playback, Time Search Function, Search Functions, 5,6,7, 1 To

Video CD Player Playback

GB

In order to playback video VIDEO-CD(‘S), make sure that your unit is connected to your TV set.

This unit is designed for playback of video CD(‘S), version 1.1 and 2.0. Only with version 2.0, is it possible to call up the on screen menu function. This unit will not play back any other video VIDEO-CD(‘S) other than 1.1 and 2.0 versions.

1	Turn on the On/Standby switch and set the VCD mode.
2	Press the Open/Close (	) button on the unit, to open the CD tray.
	Result: “OPEN” is displayed and CD tray slides open.
3	Load a video-CD(’S) with the label facing upwards in the tray.
4	Press the Open/Close (	) button again to close the CD tray.
5	To playback:

In version 1.1, press the button for direct access to the film, as there is no menu-on-screen.

In version 2.0, load a video CD, “Video CD2.0”, and “MENU ON”

are displayed on the TV screen. Press the button and the menu is displayed on the TV screen.

Select a number from the menu using Digits button on the remote

control or Multi Jog knob and press the VCD/CD( ) button. To return to the previous menu, press the Return button .

When playing a video-CD(‘S) version 2.0, reading time on the display may take longer, depending on the disc’s contents.

6	Press		button on the remote control to receive a still picture.
	Result: Pause is displayed, a still picture appears and the sound is
		muted.
7	To return to normal playback, press VCD/CD(				) button.
8	Press the Stop (			) button to stop playback.

Please make sure that the VIDEO-CD(‘S) to be played is not flawed optically, as this may cause a distorted sound or the unit to malfunction.

2,4

1

5,6,7

8

Search Functions

You can find a certain passage faster during playback.

This function is possible in CD or VCD Ver 1.1 or Ver 2.0 menu off mode.

1	To...	Press and hold down...
	Scan forwards
	Scan backwards
2	Release the Skip/Search buttons when the desired passage has
	been found.

In the video CD version 1.1, where the disc’s contents are over 15 minutes long, you can scan up or down by intervals of five minutes.

1 To... Press...

Scan forwards by 5 minute intervals Scan backwards by 5 minute intervals

Result: The picture is still, and the disc’s contents are forwarded or reversed by 5 minute intervals. Playback then resumes from this new position.

In the SKIP/SEARCH or SCAN mode, the sound can only be partially heard and the picture scenes will change sporadically, until the required passage has been found.

Volume

PREV	NEXT
	Tuning
	Mode

Volume

Time Search Function

(This function is available only during the playback of a CD/VCD)

Please use this function for reproducing a desired track in a certain time of playback.

1	Press the Time Search button.
2	Set a desired time by pressing the Digit buttons.
3	Press the Play (	) button.
				Mute	Disc Skip
		2
	1	2	3	CD Repeat	Return

4	5	6	Time	1 Disc
			Search	View

7	8	9	Sound	Slow
Band	+10/0	Mono/ST.	Key Control

b #

Zoom

Timer	AI Sleep	Counter	Deck 1/2
On/Off		Reset
	TAPE
	VCD / CD		3

16