Samsung MAXL68QH/XFO, MAXL68RH/OTO, MAXL65RH/XEF, MAXL65RH/ELS Timer Function, Cancelling the Timer

Timer Function

GB

The timer enables you to switch the system on or off at specific times.

Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off automatically, you must cancel the timer.

Before setting the timer, check that the current time is correct.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing On/Standby.
2	Press Timer/Clock until	TIMER is displayed.
3	Press Enter.

Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

4 Set the timer switch-on time.

aSet the hour by tuning the Multi Jog knob to the right or to the left.

bPress Enter.

Result: The minutes flash.

cSet the minutes by tuning the Multi Jog knob to the right or to the left.

dPress Enter.

Result: OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time.

5 Set the timer switch-off time.

aSet the hour by tuning the Multi Jog knob to the right or to the left.

bPress Enter.

Result: The minutes flash.

cSet the minutes by tuning the Multi Jog knob to the right or to the left.

dPress Enter.

Result: VOL XX is displayed, where XX corresponds to the volume already set.

6	Press Tuning Down and Up to adjust the volume level and press
	Enter.
	Result: The source to be selected is displayed.
7	Turn the Multi Jog knob to select the source to be played when the
	system switches on.
	If you select...		You must also...
	TAPE (cassette)		Insert a recorded cassette in one of
			the decks before setting the
			system to standby.
	TUNER (radio)		a Press Enter.
			b Select a preset station by tuning
			the Multi Jog knob to the right or
			to the left.
	CD (compact disc)		a Load one or more compact discs.
			b Select the required disc.
8	Press Enter to confirm the timer.
9	Press On/Standby to set the system to standby mode.
	Result:	is displayed to the bottom left of the time, indicating that

the timer has been set. The system will switch on and off automatically at the required times.

If the timer switch on and off times are identical, the word ERROR is displayed.

On/Standby											Volume
											+
	Demo
1,9	PTY
	RDS
	Display
	Timer										_
	/Clock
	2		Mono/ST	Preset/					Program	CD
				Memory						Repeat
						TUNER	CD
						Band
						D / P / S
		Deck 1/2		REV.Mode		DIRECT PLAY & SELECTION			Shuffle
						TAPE	AUX			3,4,5,6,7,8 Enter
		Multi	F			CD	Dubbing			t	Jog
	6		unction	6	REC/Pause					Mul i
						Synchro	Normal	HI - Speed
									4,5,7
		Down		Up
						CD–R/RW PLAYBACK
		Tuning Mode

To set the timer function

You may use Multi Jog or / buttons to adjust in step 4, 5, 6, 7.

You can also use Program/Set button on the remote control to instead Enter button in step 3, 4, 5, 6, 7, 8.

Cancelling the Timer

After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it.

You can stop the timer at any time (system on or in standby mode).

To...	Press Timer-On/Off...
Cancel the timer	Once.
	Result:	is no longer displayed.
Restart the timer	Twice.
	Result:	is displayed again.

On/Standby		Timer	Mute
		On/Off
EQ	Disc Skip	Program	AUX
		/Set
Deck 1/2	AI Off	Mono/ST.	Tuner

SleepBand

Tape

CD

20