Samsung MAXWL69QH/XFO manual Setting the Clock, Viewing

Viewing	Setting the Clock
t

GB

You can view the various functions available on your system.

1 Press the Demo button.

Result: The various functions available are listed in turn on the display.

Your system is equipped with a clock which allows you to turn your system on and off automatically. You should set the clock:

When you first purchase the mini-compact system

After a power failure

After unplugging the unit

All these functions are described in detail in this booklet. For instructions on how to use them, refer to the appropriate sections.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

2 To cancel this function, press Demo again.	1	Switch the system on by pressing On/Standby.
	2	Press Timer/Clock twice.
		Result: CLOCK is displayed.

3	Press Enter.
	Result: The hour flashes.
4	To...		Turn the Multi Jog knob to the...
	Increase the hours		Right
	Decrease the hours		Left
5	When the correct hour is displayed, press Enter.
	Result: The minutes flash.
6	To...		Turn the Multi Jog knob to the...
	Increase the minutes		Right
	Decrease the minutes		Left
7	When the correct time is displayed, press Enter.
	Result: The clock starts and is displayed, even when the system is in
	standby mode.
	You can display the time, even when you are using another
	function, by pressing Timer/Clock once.
	You can also use Program/Set button on the remote control
	to instead Enter button in step 3, 5, 7.
	You can also use	/	buttons to instead Multi Jog
	knob in step 4, 6.

1

2

3,5,7

4,6

10