Using Diagnostics
To access and navigate the diagnostics using the Motorola universal remote control:
1Press POWER to turn on the
2Wait five seconds and then press POWER again to turn off the
3To enable diagnostic mode, press OK within two seconds after powering off. The DIAGNOSTICS main menu is displayed on the OSD:
DIAGNOSTICS
01GENERAL STATUS
02OOB STATUS
03IN BAND STATUS
04AUDIO/VIDEO STATUS
05UNIT ADDRESS
06FIRMWARE VERSION
07CURRENT CHANNEL STATUS
08RENEWABLE SECURITY
09UPSTREAM MODEM
10APP CODE MODULES
11MEMORY CONFIG
12INTERACTIVE INFO
13MAC FREQUENCY TABLE
14CONTROL CHANNELS
15MESSAGE TYPES
16IN BAND PAT
17IN BAND PMT
18TASK STATUS
19USB STATUS
20IB MCA STATUS
21KEYBOARD / LED
4Use the CHANNEL or cursor keys to select the desired diagnostic.
5Press cursor <, cursor >, ENTER, or OK to run the selected diagnostic.
6To exit the diagnostic mode, press POWER on the remote control. The
DCT700 Installation Manual