Motorola DCT700 Standard Features, Standard Interfaces, Using This Manual, Related Documentation

1-2Introduction

Standard Features

!MPEG-2 digital video processor

!ATSC standard Dolby® Digital (AC-3) audio processor

!ITU standard 64/256 QAM FEC enhanced adaptive equalizer

!On-board real-time RF return (256 Kbps)

!Bitmapped graphics display (4/8-bit)

!88.75 to 858 MHz tuner

!DES based encryption/DCII access control

!Digital diagnostics

!Frequency agile 2.048 Mbps out-of-band data receiver

!Macrovision copy protection

!IR support for remote control

Standard Interfaces

!RF remod output (ch. 3, 4)

!Baseband video and audio Outputs

Using This Manual

This manual provides instructions to install and configure a DCT700:

Section 1	Introduction provides a product description, a list of related documentation, the technical
	helpline telephone number, and the repair/return procedure.
Section 2	Overview describes the DCT700 and provides an overview of its use. This section also
	identifies the front-panel displays and switches and describes the
	rear-panel features.
Section 3	Installation provides instructions on how to install the DCT700 in a subscriber location
	and perform operational tests.
Section 4	Troubleshooting provides guidelines for troubleshooting the equipment.
Appendix A	Specifications provide the technical specifications for the DCT700.
Appendix B	Diagnostics provide instructions on accessing and interpreting the built-in diagnostics.
Abbreviations	The Abbreviations and Acronyms list contains the full spelling of the short forms used in
and	this manual.
Acronyms

Related Documentation

Although the DCT700 User Guide may be useful, it is not necessary to install or operate the DCT700 if you have this manual.

DCT700 Installation Manual