Samsung MAXZB450RH/SPX manual Checking or Changing Programmed CD Tracks, You can store up to

Checking or Changing Programmed CD Tracks

You can check or change your selection of tracks at any time.

1	Press			once if you have started listening to the selection.
2	Press Program.
	Result: The following indications appear:
		(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
		If you have already programmed 24 tracks, CH is displayed
		instead of PR when you press Program.
3	Press Program again.
	Result: The first track selected is displayed, together with the letter
			CH(Change).
4	Press Program one or more times until the track to be changed is
	displayed.
5	If necessary, press the corresponding Disc (1, 2, 3) button to change
	discs.
6	Press		/			to select a different track.
7	Press Program to confirm your change.
8	Press CD (				) to start listening to the selection.
	Result: The first track selected is played.

	5
2,3,4,7	6
8
1
	6
1	8
2,3,4,7
6	6

Searching for and Storing the Radio Stations

GB

You can store up to:

15 FM stations

8 MW stations 7 LW stations

1	Switch the system on by pressing Standby/on.
2	Select the TUNER function by pressing TUNER .
3	Select the required frequency band by pressing TUNER (Band)
	again on the front panel or TUNER (Band) on the remote control.
	Result: The appropriate indication is displayed:
		FM	Frequency Modulation
		AM(MW)	Medium Wave
		LW	Long Wave
4	Tune in to the desired station.
		Manual tuning

Press the Tune/CD Mode button so that the "MANUAL" indica- tor lights up on the front panel display.

Press / on the main unit to tune in to the desired sta- tion manually.

or

Press Tuning or on the remote control to do the same.

Automatic tuning

Press and hold / on the main unit for more than 1 second so that the "AUTO" indicator lights up on the front panel display.

Press and briefly hold / on the main unit to begin automatic tuning.

or

Press and briefly hold Tuning or on the remote control to do the same.

Use the manual tuning method if the automatic tuning search does not stop at the desired station because the signal is weak.

For details on the Preset function, see the “Selecting a Stored

Station” on page 16.

5	Adjust the volume by:
	Turning the Volume knob on the front panel
	or
	Pressing the VOL. + or – buttons on the remote control
6	Select the FM stereo or mono mode by pressing Mono/ST. on the
	remote control.

5

4

2,3

1

4

4 4

6

15