![](/images/new-backgrounds/1227210/22721041x1.webp)
Timer Function
The timer enables you to switch the system on or off at spe- cific times.
Example: You wish to wake up to music every morning.
GB
If the timer switch on and off times are identical, the word ERROR is displayed.
| If you no longer want the system to be switched on or off auto- | |
| matically, you must cancel the timer. | |
| Before setting the timer, check that the current time is cor- | |
| rect. |
|
| For each step, you have a few seconds to set the required | |
| options. If you exceed this time, you must start again. | |
|
| |
1 | Switch the system on by pressing Standby/On. | |
2 | Press Timer/Clock until | TIMER is displayed. |
3 | Press Enter. |
|
| Result: ON TIME is displayed (instead of the equalizer symbols) | |
| for a few seconds, followed by any | |
| set; you can set the timer | |
4 | Set the timer |
|
aSet the hour by pressing the /
buttons.
bPress Enter.
Result: The minutes flash.
cSet the minutes by pressing the /
buttons.
dPress Enter.
Result: OFF TIME is displayed (instead of the equalizer sym- bols) for a few seconds, followed by any
5 Set the timer
aSet the hour by pressing the /
buttons.
bPress Enter.
Result: The minutes flash.
cSet the minutes by pressing the /
buttons.
dPress Enter.
Result: VOL XX is displayed, where XX corresponds to the vol- ume already set.
6 Press Tuning Down and Up to adjust the volume level and press
Enter.
Result: The source to be selected is displayed.
7 | pressing the |
|
| / |
| buttons to select the source to be played |
|
| |||||
|
| |||||
when the system switches on . | ||||||
|
|
|
|
|
|
|
| If you select... |
|
| You must also... | ||
|
|
|
|
|
|
|
| TAPE (cassette) |
|
| Insert a recorded cassette in one of the | ||
|
|
|
|
|
| decks before setting the system to stand- |
|
|
|
|
|
| by. |
| TUNER (radio) |
|
| a Press Enter. |
bSelect a preset station by pressing the
/
buttons.
2 | 3,4,5,6,7,8 |
| 4,5,6,7 |
| 4,5,6,7 |
1,9 |
|
To set the timer function
You can also use Program/Set button on the remote control to instead Enter button in step 3,4,5,6,7,8.
CD (compact disc) | Load one or more compact discs. |
8
9
Press Enter to confirm the timer.
Press Standby/On to set the system to standby mode.
Result: appears on the front panel display next to the time, indi- cating the timer has been set. The timer automatically turns the system on or off at a designated time.
21