Samsung MAXZS940RH/ELS To replay the CD/MP3-CD, Loading and Changing Compact Discs, To play Press

Loading and Changing Compact Discs

The CD disc changer can contain up to three 12 cm or 8 cm compact discs without using an adapter.

Never force the compact disc carrousel when opening and closing the compartment.

Never press down or place objects on the carrousel.

Always treat your compact discs with care; refer, if necessary, to the section entitled “Precautions When Using Compact Discs” on

page 26 .

1	Switch the system on by pressing ECO/STANDBY/ON.
2	Press the OPEN/CLOSE(	) button on the front panel.
	Result: The compartment opens.
3	Place one or two discs in the front slots of the carrousel, with the
	label on the discs facing upwards.
	Check that the compact disc has been correctly inserted in
	the holder before closing the compartment.
4	If you wish to load a third compact disc, press the DISC CHANGE
	button on the front panel (or DISC SKIP on the remote control).
	Result: The carrousel rotates by 120°.
5	Close the compartment by pressing the OPEN/CLOSE(		) button
	again.

If you wish to start playing a disc directly, you can also proceed as follows.

To play...	Press...
Disc 1	CD (	) or Disc 1
Disc 2	Disc 2
Disc 3	Disc 3

Result: The compartment closes automatically and the disc selected starts playing.

6 To change or unload the compact disc changer, repeat Steps 2 to 5.

Keep the compartment closed whenever you are not using it, to prevent dust from entering.

You can load or unload compact discs when the radio, tape or auxiliary source function is selected.

4

2,5

5

1

5

/

To replay the CD/MP3-CD

GB

This is a player that enables the playback of audio CD, CD-R, CD-RW and MP3-CD and does not possess the function that saves MP3 files.

Do not use CDs of irregular shapes like heart or octagon shapes. The performance of the player may be degraded.

At least more than one CD should be inserted for playbacks.

1	Press the ECO/STANDBY/ON button to switch on the power.
2	Press the CD(	) of the main unit to select the CD function.
3	Insert more than one CD or a MP3-CD.
4	Press the CD(	) button of the main unit or the	button of the
	remote control.

If there are more than one CD or an MP3-CD inserted, replays are then processed in order.

Your CD Player will take a few moments to scan through all the tracks recorded on a particular MP3-CD.

The English name of the song may be indicated on the display only if directly downloaded from the PC or if the purchased MP3-CD is sorted according to titles(directory). (Other languages besides English may not be indicated.)

The English name of the track may not be indicated depending on the characteristics of the MP3-CD.

	<CD Playback>		<During the MP3-CD playback>
				Track		Indicator
	Track Indicator
		Playtime Indicator
					Indicator Playtime Indicator
			Title(Directory)
5	Adjust the volume according to needs with the following procedures.
	Turn the VOLUME control of the main unit.

or

Press the VOLUME + or – button of the remote control. The volume level can be adjust in 31 steps(VOL MIN,VOL 1-

VOL 29,and VOL MAX).And press ENTER/DISPLAY button to select the horizontal display or the vertical display in it.

6 If it is desired to pause while the playback is processing, press the CD( ) button.

Press the CD( ) button once again to playback again.

7 To stop playback, press the button.

A new disc may be inserted in the remaining two compart- ments excluding the CD which is being played back. Press the Disc Changer button to open the CD tray. The revolving part does not turn during playbacks.

If there is not even one CD inserted in the CD tray, it is indicated as “NO DISC”.

If the CD Repeat function is not selected, 3 CDs are played back which automatically stops.

1
2,4,6	5
	/
	7
	5
	11