Samsung MAXZS940RH/ELS, MAXZS990RH/ELS manual Programming the Order of CD Play

Programming the Order of CD Play-

back(This function is not available during playback of an MP3-CD.)

You can decide:

The order in which you listen to the tracks on the discs loaded

Which tracks you do not wish to listen to

You can program up to 24 tracks.

You must stop the compact disc player before selecting the tracks. This feature can be combined with the Repeat function.

1	If the CD function is selected, stop the player by pressing	.
2	Load the selected CDs.
3	Press PROGRAM.
	Result: The following indications are displayed:

(01 = Program no., DI = Disc no., – – = Track no. on the disc)

4	If necessary, select the disc containing the required track by pressing
	the corresponding DISC (1, 2, 3) button.
5	Select the required track by turning the MULTI JOG knob:
	To the left to move back through the tracks
	To the right to move forward through the tracks
6	Press PROGRAM to confirm your selection.
	Result: The selection is stored and		is displayed.
7	To select other tracks, repeat Steps 4 to 6.
8
	Press CD (	) to listen to the track selection in the order
	programmed.
9
	To...		Turn the MULTI JOG knob...
	Listen to the current track again		One notch to the left
	Listen to the previous track		Two notches to the left
	Listen to the next track		One notch to the right
	Skip forwards or backwards one		The appropriate number of
	or more tracks		notches to the right or to the
			left

10 To cancel the selection, press .

Once if the compact disc player is stopped Result: PRGM is no longer displayed.

If you open the compartment, the selection is cancelled.

If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track.

You can also use the / buttons to select the required tracks in step 5, 9.

You can also use the PROGRAM/SET button on the remote control to instead PROGRAM button on the front panel in step 3, 6.

GB

4

8

/

5,9

1,10

3,6

15