126
How to set up manually
1
Go to the Network Settings screen. Select Start, press E.
2
The Network function searches for available wireless networks. When done, it displays a list of the available networks.
3
In the list of networks, press the or button to select a network, and then press the E button twice.
―If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name and Security Key to establish the
connection.
4
If the Enter security key. screen appears, go to step 5. If you select a wireless router that does not have security, go to step 7.
5
If the router has security, enter the Security Key (Security Key or PIN).
6
When done, use the right arrow button to move the cursor to Next, and then press E. The network connection screen appears and the verification process starts.
7
Select Stop while network connections are being attempted. This will stop the connection.
8
Select IP Settings on network connection screen. The IP Settings screen appears.
9
Select the field at the top, press E, and then set IP Setting to Enter manually. Repeat the entry process for each field in the IP Address.
―Setting IP Setting to Enter manually automatically changes DNS setting to Enter manually.
10
When done, select OK at the bottom of the page, and then press E. The network test screen appears and the verification process starts.
11
When the connection has been verified, the “Your wireless network and Internet connection are setup and ready to use.” message appears.