Samsung ME83DST/XSV Installing your microwave oven, Setting the time, Once, Twice, Clock, in the, Clock button, Then press the, 24-hournotation, 12-hournotation

Installing your microwave oven

Place the oven on a flat level surface 85 cm above the floor. The surface should be strong enough to safely bear the weight of the oven.

Setting the time

Your microwave oven has an inbuilt clock. When power is supplied, “12:00” is automatically displayed on the display.

1.When you install your oven, make sure there is adequate ventilation for your oven by leaving at least 10 cm (4 inches) of space behind and, on the sides of the oven and 20 cm (8 inches) of space above.

20 cm	10 cm
above	behind
85 cm of	10 cm on
the floor	the side

Please set the current time. The time can be displayed in either the 24- hour or 12-hour notation. You must set the clock:

•When you first install your microwave oven•After a power failure

Do not forget to reset the clock when you switch to and from summer and winter time.

ENGLISH

2. Remove all packing materials inside the oven. Install the roller ring and turntable.

Check that the turntable rotates freely.3.This microwave oven has to be positioned so that plug is accessible.

If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

For your personal safety, plug the cable into a 3-pin, 230 Volt, 50 Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable.

Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

1. To display the time	Then press the
in the...	Clock button...
24-hour notation	Once
12-hour notation	Twice

2. Set the hour with the h button and the minutes with the min button.

3.When the right time is displayed, press the Clock button again to start the clock.

Result : The time is displayed whenever you are not using the microwave oven.