4. Connecting to a Macintosh
Connecting Your Monitor Installing the Monitor Driver Installing a VESA base
1.Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.
2.Connect the signal cable to the
3.For older model Macintoshes, you need to adjust the resolution control DIP switch on the Macintosh adapter (optional) referring to the switch configuration table shown on its rear.
4.Turn on the monitor and Macintosh.
5.Connecting Headphone
You may connect your headphones to the monitor.
1. Connect your headphones to the Headphone connection terminal.