Repeating One or All Tracks on the Compact Discs

You can repeat playing CD indefinitely.●●CD containing a specific track.●●Whole tracks of a selected CD.1.Press REPEAT button.

Each time you press the REPEAT button, the repeat mode will change as following:

MP3 : R OFF ;R TRK ; R DIR ; R DISC; R RAN.(MM-E320)

MP3 : OFF;TRACK; DIR; ALL; RANDOM .(MM-E330)

CD : R OFF ;R TRK ; R ALL; R RAN .(MM-E320)

CD : OFF ;TRACK ; ALL; RANDOM .(MM-E330)

•Depending on your product,the repeat mode display maybe different.

2.When you wish to stop the Repeat function, press REPEAT until "R OFF(OFF)" is displayed.

•R OFF(OFF) : Cancels Repeat Playback.•R TRK(TRACK) : Repeatedly plays the selected track.•R DIR(DIR) : Repeatedly plays all tracks in the selected folder.•R DISC : Repeatedly plays the entire disc•R ALL(ALL) : Repeatedly plays the all tracks in the disc.•R RAN(RANDOM) : Plays tracks in random order.

CD Programming

(This function is not available during playback of an MP3/WMA-CD.)●●You can program the playback order of up to 24 tracks of your choice.●●However, you must stop playing the CD before selecting tracks.1.While in CD playback mode, press STOP(@) to stop playing the CD.2.Press the ENTER button to display the message below:(01= program number, --= track number)3.Use [ or ] to move to a desired track.•Press [ to move to the previous track.•Press ] to move to the next track.4.Press the ENTER button to confirm yourselection,the selection is stored and displayed.5.To select a different track, following the steps 3 to 4 above.6.Press Play (p) to play the programmed tracks.

7.Press STOP (@) to stop playing the programmed tracks, Press STOP (@) again to cancel playing the programmed tracks.

•If you open the disc tray or turn off the product, your programming will be canceled.

Searching for a Specific Music Passage on a CD

When listening to a compact disc, you can quickly search for a specific music passage on a track.

To search forPress

 

 

- Forwards ...............) button
- Backwards ............( button

Check and Edit the Programmed Tracks

You can check a list of programmed tracks and edit them as you want.1.If a programmed track is being played, press STOP (@) once.2.Press ENTER twice to display the message below:

Press and hold the [/] button on the top panel to automatically scan for a track.

10 Skip Track

Press the +10 button while in playback mode.This will skip the tracks as many as 10 from the current track.8English
(C=Check, 01= program number)If a total of 24 tracks are already programmed, “C”will be displayed rather than “P” in the display.3.Repeat pressing ENTER until the desired track is displayed.4.Press [ or ] to select a different track.5.Press ENTER to confirm your selection.6.To play the programmed tracks, press Play (p).