Record Function

You can record the audio of a CD/Radio or external music player to a USB storage device.

1.Connect the USB device to the USB port () of the main unit.2.Play CD/Radio to record, or connect the external device to the main unit.-CD●●Press F() on the top panel to select MP3/ CD.●●Press OPEN/CLOSE button to open the disc tray.●●Insert a CD and press OPEN/CLOSE button to close the disc tray.●●Press [ or ] to play a desired music.-FM Tuner●●Use the F( ) button to select FM mode.●●Select a radio frequency to record.-External Device●●Connect the external device (MP3 player) to the product.●●Press F( ) button to select AUX mode.●●Play the music file in the external device.3.Press the USB REC button to start recording.

-CD

●●“TRACK RECORDING” is displayed and CD recording starts.●●Press and hold the USB REC button to start recording the all tracks of Disc."FULL CD RECORDING" is displayed.

●●If you record the MP3 , the file is copied into the USB device totally. “STOP”“COPY XX”“COPY END” is displayed. When the recording is done, “STOP” will be displayed.

●●If there is the same file name,“STOP”"FILE EXIST" is displayed, and the function is canceled.-FM /External Source●● RECORDING is displayed.4.Press STOP (@) to stop playing. Then, a mp3 file will be created accordingly.5.To remove the USB storage device safely, press STOP (@) again.

●●After the recording, a directory named “RECORDING”(CD), “CD COPY”(MP3 CD), “TUNER RECORDING” or “AUX RECORDING” will be created in your device.

●●Do not disconnect the USB or the AC Cord during the recording as this may cause file damage.

●●If you disconnected USB device during the recording, the main unit will be power off and you may not delete the recorded file, In this case, please connect the USB device to the PC and backup the USB data on the PC first and then format the USB device.

●●When the USB memory is not enough, it will be displayed “NOT ENOUGH MEMORY”.

●●The recording works if the USB device or the HDD is formatted in the FAT file system.(The NTFS file system is not supported.)

●●When you use CD high speed search func- tion, the CD recording can’t work.●●Sometimes, the recording time may be longer with some USB devices.●●In the program mode, you can't use the CD recording function.●●When the CD recording, the EQ can not work and automatically change to OFF.

●●When the CD recording, the REPEAT func- tion can not work and automatically changes to OFF.

●●You can not record the radio when search- ing or no available frequencies in the Tuner mode.

●●Note that setting the input level too loud when recording music from an external device through the AUX and USB channel may introduce noise into the recording. In that case, lower the external device’s volume level.

●●No sound is heard during CD recording.

EQ Mode

The micro component system supports the predefined equalizer settings between high and low frequencies to be in harmonious with the current music genre.

Press EQ on the remote control.Each time you press EQ,the EQ model will switch in the following order:

P BASS;OFF ;FLAT;RANCHA ; SAMBA ; CUMBIA ; HABANA; BOOMBA;REGGAE ; PARTY ; POP ; HIPHOP; ROCK;JAZZ ; CLASS

;STA+EQ; DYN+S;MP3+ ; VIR+S .

●●The EQ button will be disabled during the recording, and the product switches to “ OFF” automatically.

●●Some regional EQs are special,such as India,Africa,and so on.Please refer to the display of actual product to operate.

English 11