Electrolux ENB 38607 W user manual The DrinksExpress device in stand-by mode, Cleaning the device

Models: ENB 38607 X ENB 38607 W ENB 38607 W8

1 36
Download 36 pages 36.97 Kb
Page 14
Image 14
The DrinksExpress device in stand-by mode

14 electrolux GB

Hold down the control button for 1sec to turn ON the system / device.

Set the type of beverage and start the cooling with the control button on the device user interface (UI).

If you push the button once then the LED on the DrinksExpress display lights up to the first beverage type (Type A).

If you push it once again within the next 3 seconds then the vessel Type B will be preselected. Continuing pressing it and you will move on the next Type of vessel until you arrive at the last Type (Type F).

Pressing on more time and you will turn off the unit.

Once you have selected the type of vessel, following the previous guidelines, just leave the unit as it is (LED blinking), and after 3 seconds it will initiate the cooling automatically.

Immediately you will see on the external display on top of the refrigerator an icon being activated (bottle icon as on the figure below).

Vessel capacity of the DrinksExpress unit:

Inside DrinksExpress unit you can chill down up to:

8 cans of 0.33 cl or 0.5 cl

4 PET bottles of 0.5 cl

2 wine bottles 0.75 lt a 2lt Tetrapak

a 1.5 lt PET bottle or even a Magnum bottle

The DrinksExpress device in stand-by mode

In stand-by mode this specific compartment is a refrigerated zone that can be used as extension of the fresh food compartment for storing food or beverages.

The temperature inside the DrinksExpress device when not in use is at the same level as the crisper bin beside.

Activating icons for DrinksExpress function on the

topdisplay

Once the cooling cycle is finished, you will receive an acoustic signal as the bottle icon on the external display is blinking.

This acoustic signal will be repeated every 10 seconds during a period of 30 minutes after which the DrinksExpress unit will automatically switch off. You can manually deactivate the acoustic signal and switch off the DrinksExpress unit by pressing the control button.

Cleaning the device

DrinksExpress device is easy to clean because it has a flat surface inside that can be easily cleaned with a damp cloth.

A removable plate on the bottom collects any possible drink spillage and condensation water: it can be removed for cleaning even under hot water (but it is not recommended to put it into a dishwasher).

Page 14
Image 14
Electrolux ENB 38607 X, ENB 38607 W8 user manual The DrinksExpress device in stand-by mode, Cleaning the device