GB electrolux 29
Place the freezer door on the lower door retaining pin (f) (Fig. 4).
Open doors and fix the double door mount with 2 screws (c) on the left- hand side. Don't forget the plastic spacer under the door (b) as well. The edges of the doors must run parallel to the side edge of the appliance.
Place the fridge door on the double door retaining pin.
Remove the top
Open the fridge door, attach the top cover (j) using 2 screws (a); at the same time pay attention to the repositioning of the magnet (k), then close the door (Fig. 2).
Put the appliance into position, make sure it is level and connect to the electrical supply.
If you do not want to carry out these steps yourself, please contact your local Service Force Centre.
The engineer will carry out the door reversal at your cost.
