Electrolux ENB 38607 W8, ENB 38607 X user manual electrolux GB

28 electrolux GB

Fig.3

Remove double door mount (a, b, c) from the body of the appliance in steps. Please make sure the plastic spacer (b) under the door mount is also removed (Fig. 3).

Lift the freezer door up slightly and remove.

Remove stops in both doors (t, z) (Fig. 5).

Lift out the insert for the lower covering grid (e) using a screw driver (Fig. 4).

Unscrew the bottom door retaining pin for the freezer door (h, f) and then screw in on the other side. Don't forget the spacer (h) (Fig. 4).

Insert the insert for the lower covering grid (e) on the other side.

Fig.4

Remove the left-hand cover pin of the double door mount (3 pieces, n, k) and move to the other side (Fig. 3).

Disassemble the door locking elements (u, v) by unscrewing the screw (s) (Fig. 3).

Reverse the door locking elements (u, v), move to the other side of the other door and fix by screwing in the screw

(s).

Re-insert the stoppers (t, z) on the other side of the doors.

Fig. 5.

Fit the pin of the double door mount

(m)into the left-hand hole of the freezer door (Fig. 3).