Timer Function
The timer enables you to switch the system on or off at specific times automatically.
•Before setting the timer, confirm that the current time is correct.
•During each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
•If you no longer want the system to be switched on or off automatically, cancel the timer by pressing the TIMER ON/OFF button.
Example: You want to wake up to music every morning.
1.Switch the system on by pressing the POWER ( 
)button.
2.Press the TIMER CLOCK button until 
TIME is displayed.
3.Press the ENTER ( 
) button.
Result: ON is displayed for a few seconds. You can set the timer
4.Set the timer
a.Press the , or . button to set the hours.
b.Press the ENTER ( 
) button. Result: The minutes flash.
c.Press the , or . button to set the minutes.
d.Press the ENTER ( 
) button.
Result: OFF is displayed for a few seconds. You can now set the timer
5.Set the timer
a.Press the , or . button to set the hours.
b.Press the ENTER ( 
) button. Result: The minutes flash.
c.Press the , or . button to set the minutes.
d.Press the ENTER ( 
) button.
Result: VOL XX is displayed, where XX corre- sponds to the volume already set.
6.Press the , or . button to adjust the volume level, and then press the ENTER ( 
)button. Result: The source to be selected is displayed.
7.Press the , or . button to select the desired source to be played when the system switches on.
If you select... You must also...
FM (radio) | a Press the ENTER ( | ) button. |
bSelect a preset station by pressing the , or . button.
CD/MP3 (compact disc) | Load one compact disc. |
USB | Connect the USB device. |
8.Press the ENTER ( 
) button.
Result: CHKREC (Do you want to record?) is dis- played.
9.Press the ENTER ( 
) button.
Result: REC N is displayed. You can press the
,or . button to select REC Y or REC N, and
then press ENTER ( 
) button.
1). If you select REC N, the Micro Component will not record when it turns on. If you have already set a tuner timer recording, selecting REC N cancels it. Note that the Micro Component will still turn on and off at the times you set earlier in this procedure.
2). If you select the REC Y, you can set the Micro Component to record when it turns on. The recording switch on and switch off times can be different from the timer switch on and off times you set earlier in this procedure.
a.Press the ENTER ( 
) button.
Result: ON is displayed for a few seconds. You can set the tuner timer recording
b.Press the ENTER ( 
) button. Result: OFF is displayed for a few seconds. You can set the tuner timer
recording switch-off time.
• The maximum tuner timer recording time is 5 hours.
• If the timer switch on and off times are identical, the word ERROR is displayed.
• When there is no disc in or USB connected to the Micro Component, if you select "MP3/CD" or "USB", the Micro Component automatically selects "FM".
• If the
• If the auto timer is turned on, the MP3/CD or USB function may require an additional step to be activated depending on the disc (or device). It is better for you to select the tuner function instead.
Cancelling the Timer
After you have set the timer, the unit will start automatically at the time shown by the TIMER indication on the display. If you no longer want to use the timer, you must cancel it.
1. To cancel the timer, press TIMER ON/OFF once,
is no longer displayed.
2. To resume the timer, press TIMER ON/OFF again. 
is displayed again.
• When you select the TIMER OFF mode, the TIMER RECORDING and TIMER function are not available.
