Recording Function
You can record from a CD, radio broadcast, or an external source to a USB storage device.
1.Connect an external USB storage device to the USB jack on your product.
2.Play a disc, tune to a station, or connect an external source to your product.
CD
• Press the 
button on the main unit or press the FUNCTION button on the remote control to select the MP3/CD function.
•Press the OPEN/CLOSE button to open the disc tray.
•Insert a CD and press the OPEN/CLOSE button to close the disc tray.
•Use the CD selection buttons ( [ or ] ) to select the desired song.
Tuner
• Press the 
button on the main unit or press the FUNCTION button on the remote control to select the FM function.
•Tune to a station you want to record. External Source
•Connect an External Component/MP3 player to your product.
• Press the 
button on the main unit or press the FUNCTION button on the remote control to select the <AUX> input.
•Play a song from the external device.
3.Press the USB REC button to start recording.
CD
•“TRACK RECORDING” is displayed and CD recording starts.
•Press and hold the USB REC button to start recording all tracks on the disc. "FULL CD RECORDING" is displayed.
MP3/WMA-CD
•Press the USB REC button. The currently playing file is copied onto the USB device.
•Press and hold the USB REC button. All the files in the current folder are copied onto the USB device.
COPY: “CHECK”“START”“COPY XX”“COPY END” is displayed. When the recording is done, “STOP” will be displayed.
•If there is a duplicate file name, "FILE EXIST" is displayed, and the function is canceled.
Tuner /External Source
•Tuner: "TUNER RECORDING""RECORD"
•External Source : "AUX RECORDING""RECORD"
4.To stop recording, press the STOP (@) button. The product automatically creates and saves recorded files in .MP3 format
5.To remove the USB device safely, press the STOP (@) button once again. After recording, a directory named “RECORDING(DISCxxxx)”(FULL CD RECORDING), “RECORDING”(TRACK RECORDING), “CD
• Do not disconnect the USB or the AC Cord during recording as this may cause damage to the file.
•If you disconnect the USB device during a recording, the unfinished recording file may get damaged and cannot be deleted. If this occurs, please connect the USB device to a PC, back up the data stored in the USB, and then format it.
•When the USB memory has insufficient free space, the system will display “NOT ENOUGH MEMORY”.
•The USB device or HDD you are recording to must be formatted in the FAT file system. The NTFS file system is not supported.
•When you use the CD high speed search function, CD recording is not available.
•Sometimes, the recording time may be longer with some USB devices.
•The REPEAT function is set to "OFF" automatically and is not available during a recording.
•You cannot record the radio when searching or when no available station is found in the Tuner mode.
•Note that setting the input level too loud when recording music from an external device through the AUX or USB channel may cause noise in the recording. If this occurs, lower the external device’s volume level.
•The maximum TUNER/AUX recording time is 5 hours.
