Samsung MM-J5S instruction manual Listening to a Cassette, Timer Function, Cancelling the Timer

MM-J5-RDS(GB) 9/15/04 19:18 Page 16

Listening to a Cassette

	GB		1	Switch the system on by pressing Standby/On (						) .
			2	Select the TAPE function by pressing TAPE on the front panel.
		3		Open the cassette deck by pushing on the corner of the cover marked
4				PUSH EJECT until you hear a click and then release it.
				Insert the pre-recorded cassette with the open edge of the tape facing
				downwards.
5				Close the deck by pushing on it until it clicks into place.
6				Press the TAPE(	) button.
				Result: The cassette starts playing.
7				Press TAPE SPEED to adjust the speed of the tape playing.And
				each time the button is pressed,the mode changes as follows.
				-10%SPEED		+10%SPEED			NORMAL
8				When the cassette is stopped, select one of the following functions as
				required.
				To...		Press...
				Rewind the cassette			/
				Fast-forward the cassette				/
				The cassette player stops automatically when the beginning or end of
				the cassette is reached.

9	To stop the playback or search, press STOP (			) button.
	1			7
			2,6
	8	9	8	3,5

Recording a Compact Disc

Direct recording

The direct recording mode enables you to start recording with any track on the compact disc.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch your system on by pressing Standby/On (				) .
2	Insert a blank cassette in Deck.
3	Load a compact disc.
4	Press the CD(	) button.
5	Use the CD selection (		,	) buttons to select the desired song.
	Press the REC/PAUSE button.
6	Result: Recording will begin.
	To stop recording, press STOP (			)button.

16

	1
5
	4
4	4
	6

Recording a Radio Program

You can record a radio program of your choice.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch the system on by pressing Standby/On (						) .
2	Insert a blank cassette in Deck.
3	Select the TUNER function by pressing TUNER/BAND.
4	Select the radio station that you wish to record by pressing
		or	button on the front panel or		/	on the remote
	control .
5	Press REC/PAUSE.
	Result: REC is displayed and recording starts.
6	To stop recording, press STOP (			)button.

1
5
	3
4	4
	6

Timer Function

The timer enables you to switch the system on or off at specific times. Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off automatically, you must cancel the timer.

Before setting the timer, check that the current time is correct.

For each step, you have a few seconds to set the required options. If you exceed this time,you must start again.

1	Switch the system on by pressing Standby/On (							).
2	Press Timer/Clock until TIMER is displayed.
3	Press PROGRAM/SET.
	Result:ON TIME is displayed				for a few seconds, followed by any switch-
4	on time already set; you can set the timer switch-on time.
	Set the timer switch-on time.
	a Set the hour by pressing					and	.
	b Press	PROGRAM/SET.
	Result: The minutes flash.
	c Set the minutes by pressing					and	.
	d Press	PROGRAM/SET.
	Result: OFF TIME is displayed for a few seconds, followed by any
		switch-off time already set; you can now set the timer switch-off
		time.
5	Set the timer switch-off time.
	a Set the hour by pressing					and	.
	b Press	PROGRAM/SET.
	Result: The minutes flash.
	c Set the minutes by pressing					and	.
	d Press	PROGRAM/SET.
	Result: VOL 10 is displayed, where 10 corresponds to the volume already
	set.
6	Press	and		to adjust the volume level and press
	PROGRAM/SET.
	Result:The source to be selected is displayed.
7	Press	and		to select the source to be played when the system
	switches on.
	If you select...			You must also...
	TAPE (cassette) ........................• Insert a recorded cassette in the deck.
	TUNER (radio)		..........................			• Select the FM or AM (MW/LW) frequency
						band by pressing		and	.

•Press PROGRAM/SET.

•Select a preset station by pressing

and

8		.......................			Load a compact disc.
	CD (compact disc)
9	Press	PROGRAM/SET to confirm the timer.
	Press Standby/On to set the system to standby mode.
	Result:	is displayed on the top right of the time, indicating that the timer has
		been set. The system will switch on and off automatically at the required
		times.
		If the timer switch on and off times are identical, the word ERROR
		is displayed.
		You can use	/	button on the front panel instead of

/ button on the remote control in step 4,5,6,7.

GB

		MUTE
TUNER1,9	TIMER/CLOCK2	TIMER ON/OFF
BAND
AUX	PROGRAM/SET	REP. A B
3,4,5,6,7,8		MO/ST
		TAPE SPEED
SLEEP	EQ/S.BASS
POWER SOUND	DISPLAY	RDS PTY

CD

VOLUME4,5,6,7TUNING

TUNING

REPEAT MODE

+10

4,5,6,7

TA P E

Cancelling the Timer

After having set the timer, it will start automatically as shown by the timer indication on the display. If you no longer wish to use the timer, you must cancel it.

You can stop the timer at any time (system on or in standby mode).

To...	Press TIMER ON/OFF...
Cancel the timer	Once.
	Result:		is no longer displayed.
Restart the timer	Twice.
	Result:		is displayed again.
			MUTE
TUNER	TIMER/CLOCK	TIMER ON/OFF
BAND
AUX	PROGRAM/SET		REP. A B
			MO/ST
SLEEP	EQ/S.BASS		TAPE SPEED
POWER SOUND	DISPLAY	RDS	PTY

17