Timer Function

The timer enables you to switch the system on or off at specific times.

If you no longer want the system to be switched on or off automatically, you must cancel the timer.

Before setting the timer, check that the current time is correct.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

Cancelling the Timer

After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it.

Example: You wish to wake up to music every morning.

Switch the system

Press

TIMER/CLOCK

on by pressing

until TIMER is

1 POWER.

2 displayed.

Press the ENTER

3 button.

ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

To cancel the timer, press TIMER ON/OFF once.

is no longer displayed.

4 Set the timer switch-on time.

a. Set the hour by pressing or button.

b. Press ENTER.

The minutes flash.

c.Set the minutes by pressing or button.

d.Press ENTER.

OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch- off time already set; you can now set the timer switch-off time.

5 Set the timer switch-off time.

a. Set the hour by pressing or button.

b. Press ENTER.

The minutes flash.

c.Set the minutes by pressing or button.

d.Press ENTER.

VOL 10 is displayed, where 10 corresponds to the volume already set.

Press or button

6 to adjust the volume level and press

ENTER.

The source to be selected is displayed.

To resume the timer, press TIMER ON/OFF again.

is displayed again.

Note

You can cancel the timer while the power is on or while the player is in standby.

Press or button

8

Press ENTER to

to select the source to

confirm the timer.

be played when the

 

7 system switches on.

 

TUNER (radio) : a Press ENTER. b Select a preset

station by pressing Tuning or .

CD (compact disc) : Load a compact disc.

USB :Connect the USB.

Press POWER to

9 set the system to standby mode.

is displayed to the top-right of the time, indicating that the timer has been set.

The system will switch on and off automatically at the required times.

MISCELLANEOUS

61

Note

If the timer switch on and off times are identical, the word ERROR is displayed.

62