P.SCAN(Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire
picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.
Setting
the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1 Press STOP button.
•If playing a disc, press the STOP button twice so that “STOP”, appears on the display.
2 Press and hold P.SCAN button on the remote control for over 5 seconds.
•Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan" alternately.
•When you select P.SCAN, "P.SCAN" will appear on the display.
•To set P.Scan mode for DivX and MP3 discs, press the P.SCAN button on the remote control for more than 5 seconds with no disc in the unit (“'NO DISC" on the display), then load the DivX disc and play.
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS) | Progressive Scan (FULL FRAME) |
Switch the system
1 on by pressing POWER button.
When the correct
4 hour is displayed, press ENTER. The minutes flash.
•Increase the minutes : 
•Decrease the minutes : 
2 Presstwice. TIMER/CLOCK
•CLOCK is displayed.
5 | When the correct |
time is displayed, | |
press ENTER. |
•"TIMER" appears in the display.
•The current time is now set.
3 Press ENTER. The hour flashes.
• Increase the hours : |
• Decrease the hours : |
Note |
• You can display the time, even |
when you are using another |
function, by pressing |
TIMER/CLOCK once. |
In | The progressive scanning method scans one full frame of |
interlaced fields (odd and even), where each field | video consecutively down the screen, line by line. |
contains every other horizontal line in the frame. | An entire image is drawn at one time, as opposed to the |
The odd field of alternating lines is displayed first, and | interlaced scanning process by which a video image is |
then the even field is displayed to fill in the alternating | drawn in a series of passes. |
gaps left by the odd field to form a single frame. | The progressive scanning method is desirable for dealing |
One frame, displayed every 1/25th of a second, contains | with moving objects. |
two interfaced fields, thus a total of 50 fields are |
|
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function DVD
displayed every 1/50th of a second. |
The interlaced scanning method is intended for capturing |
a still object. |
Note | • This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support |
| Progressive Video. (It does not work on TVs with conventional component inputs, i.e., |
| scan TVs.) |
•Depending on the capabilities of your TV, this function may not work.
1 Press ZOOM button.
ENTER ZOOM
POSITION
2
, 
buttons to move to the area you want to enlarge.Press Cursor , ,
3 Press ENTER button.
•Each time the button is pressed, the zoom level changes as follows:
13
14
