Samsung MM-L4, MML4RH/ELS manual Safety Precautions, Before Contacting the After-Sales Service

Safety Precautions

The following diagrams illustrate the precautions to be taken when GB using or moving your Micro component system.

10%	35°	75%
H	5°	H

Before Contacting the After-Sales Service

It always takes a little time to become familiar with a new appliance. If you have any of the problems listed below, try the solutions given. They may save you the time and inconvenience of an unnecessary service call.

	Problem	Checks/Explanation
	The system does not work	• The power cord is not correctly plugged into a wall
		socket or the wall socket is not switched on.
		• The remote control batteries need replacing or
G		the polarity has not been respected.
		• The On/Standby button has not been pressed.
E
N	There is no sound	• The volume has been completely turned down.
E		• The correct function (TUNER, CD, TAPE, AUX)
R		has not been selected.

Ambient operating conditions:

Ambient temperature	5°C-35°C
Humidity	10-75%

Do not place potted plants or vases on top of the unit. Moisture entering the unit could lead to dangerous electric shock and cause equipment damage. In such events immediately disconnect the power cord from the socket.

Do not expose the unit to direct sun radiation or other heat sources. This could lead to overheating and malfunction of the unit.

During thunderstorms, disconnect the power cord from the socket. A voltage surge due to lightning could damage the unit.

A		• You have connected a set of earphones.
		• The loudspeaker wires have been disconnected.
L
	The Timer does not work	• The timer has been stopped by pressing Timer
		On/Off.
	Incase it is not worked, even	Press the S.BASS button for 5 seconds in
	the action is taken as above.	power ‘OFF’(standby), then it is returned the
		original position (RESET).
	The compact disc player does not	• The CD function has not been selected.
C	start playing	• The disc has been inserted face down or is either
		dirty or scratched.
		• The laser sensor is dirty or dusty.
D		• The system has not been installed on a flat, hori-
		zontal surface.
		• Condensation has formed in the player; leave the
		system in a warm, airy room for at least one hour.
C		• The TAPE function has not been selected.
A	The tape does not start playing	• The cassette has not been inserted correctly.
S
		• The cassette player has not been closed.
S		• The tape is either slack or broken.
E
T	The volume falls off	• The audio heads are dirty.
T
	The cassette is not erased correctly	• The rollers or drive capstans are dirty.
E
	There is excessive wow and flutter	• The tape is worn.
S
R	Reception is poor or no radio stations	• The TUNER function has not been selected.
	are received at all	• The radio frequency has not been correctly
		selected.

VOLUME

Remove the batteries from the	When using headphones, take care
remote control, if not used for any	not to listen at excessive volumes.
extended periods.	Extended use of headphones at
Leaking batteries can cause serious	high volumes will lead to hearing
damage to the remote control.	damage.

Do not place heavy items on the	Do not remove any equipment pan-
power cord. Power cord damage	els. The inside of the unit contains
can lead to damage of the	live components, which cause
equipment (fire hazard) or cause	electric shock.
electric shock.

A	• The aerial has been disconnected or is not facing
D
	the right way. Turn it until you find the best orien-
I
	tation.
O
	• You are in a building that blocks radio waves; you
	must use an outside aerial.

If the above guidelines do not allow you to solve the problem, take a note of:

The model and serial numbers, normally printed on the rear of the system

Your warranty details

A clear description of the problem

Then contact your local dealer or SAMSUNG after-sales service.

20