Samsung MM-T6R/ELS manual Listening to a Cassette, Timer Function, Cancelling the Timer

Listening to a Cassette

GB

1	Switch the system on by pressing Standby/On (						) .
2	Select the TAPE function by pressing TAPE on the front panel.
3	Open the cassette deck by pushing on the corner of the cover marked PUSH
	EJECT until you hear a click and then release it.
4	Insert the pre-recorded cassette with the open edge of the tape facing
5	downwards.
	Close the deck by pushing on it until it clicks into place.
6	Press the TAPE(	) button.
	Result: The cassette starts playing.
7	Press TAPE SPEED on the remote to adjust the speed of the tape
	playing.And each time the button is pressed,the mode changes as
	follows.
	-10%SPEED		+10%SPEED			NORMAL
8	When the cassette is stopped, select one of the following functions as
	required.
	To...		Press...
	Rewind the cassette			/
	Fast-forward the cassette				/
	The cassette player stops automatically when the beginning or end of
	the cassette is reached.

9	To stop the playback or search, press STOP (			) button.
	1
			2,6
	8	9	8	3,5

Recording a Compact Disc

Direct recording

The direct recording mode enables you to start recording with any track on the compact disc.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch your system on by pressing Standby/On (				) .
2	Insert a blank cassette in Deck.
3	Load a compact disc.
4	Press the MP3-CD(	) button.
	Use the CD selection (		,	) buttons to select the desired song.
5	Press the REC/PAUSE button.
	Result: Recording will begin.
6	To stop recording, press STOP (			) button.

20

You can record a compact disc on a cassette in two different ways:

Synchronised recording

Direct recording

Synchronised recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing (	) .
2	Insert a blank cassette in Deck.

Press the PUSH/EJECT button ( ) to open the cassette door, insert a cassette, and then close the cassette door.

Insert the cassette with the safety tabs.

3 Load a compact disc.

Press the PUSH/EJECT button ( ) to open the CD door.

Insert a CD and press the PUSH/EJECT button ( ) to close the CD door.

Press the MP3-CD(√/») button.

4 Use the CD selection ( , ) buttons to select the desired song. Press and hold CD SYNC/REC/PAUSE button.

5 When stopped, press the button to start the recording from the first piece of music.

Press and hold CD SYNC/REC/PAUSE button during the play- back of CD to start the recording from the first part of the music being played.

6 To stop recording, press	button.
1
	5
4
4	4
	6

Recording a Radio Program

You can record a radio program of your choice.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch the system on by pressing Standby/On (	) .
2	Insert a blank cassette in Deck.
3	Select the TUNER function by pressing TUNER/BAND.
4	Select the radio station that you wish to record by pressing

or button on the front panel or or on the remote control.

5 Press REC/PAUSE.

Result: REC is displayed and recording starts.

6 To stop recording, press STOP ( )button.

	1
	5
	3
4	4
	6

Timer Function

The timer enables you to switch the system on or off at specific times. Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off automatically, you must cancel the timer.

Before setting the timer, check that the current time is correct.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing Standby/On (							).
2	Press TIMER/CLOCK until				TIMER is displayed.
3	Press PROGRAM/SET.
	Result:ON TIME is displayed				for a few seconds, followed by any switch-
4	on time already set; you can set the timer switch-on time.
	Set the timer switch-on time.
	a Set the hour by pressing					and	.
	b Press	PROGRAM/SET.
	Result: The minutes flash.
	c Set the minutes by pressing					and	.
	d Press	PROGRAM/SET.
	Result: OFF TIME is displayed					for a few seconds, followed by any
		switch-off time already set; you can now set the timer switch-off
		time.
5	Set the timer switch-off time.
	a Set the hour by pressing				and		.
	b Press	PROGRAM/SET.
	Result: The minutes flash.
	c Set the minutes by pressing					and	.
	d Press	PROGRAM/SET.
	Result: VOL 10 is displayed, where 10 corresponds to the volume already
	set.
6	Press	and		to adjust the volume level and press
	PROGRAM/SET.
	Result:The source to be selected is displayed.
7	Press	and		to select the source to be played when the system
	switches on.
	If you select...			You must also...
	TAPE (cassette)			........................		Insert a recorded cassette in the deck.
					•
	TUNER (radio)		..........................			Select the FM or AM (MW) frequency
					•
						band by pressing		and	.

•Press PROGRAM/SET.

•Select a preset station by pressing

and .

	CD (compact disc)			.......................
						Load a compact disc.
8	USB	.......................			Insert a USB.
	Press		PROGRAM/SET to confirm the timer.
9	Press Standby/On to set the system to standby mode.
	Result:		is displayed on the top right of the time, indicating that the timer has
			been set. The system will switch on and off automatically at the required
			times.
			If the timer switch on and off times are identical, the word ERROR
			is displayed.
			You can use		/	button on the front panel instead of

/ button on the remote control in step 4,5,6,7.

GB

POWER	DEMO/
	DIMMER
		USB
1,9	2
TIMER	TIMER/CLOCK	PROGRAM/SET
ON/OFF	REP A3,4,5,6,7,8-B REPEAT
SLEEP
MO/ST	COUNT RESET	TAPE SPEED
CD SYNC	RDS
	DISPLAY	PTY
	TAPE
	4,5,6,7
USB/MP3-CD/CD
	MUTE
VOLUME	TUNING/
	ALBUM
		4,5,6,7
SURROUND	EQ/S BASS	TUNING
		O

Cancelling the Timer

After having set the timer, it will start automatically as shown by the timer indication on the display. If you no longer wish to use the timer, you must cancel it.

You can stop the timer at any time (system on or in standby mode).

To...	Press TIMER ON/OFF...
Cancel the timer	Once.
	Result:		is no longer displayed.
Restart the timer	Twice.
	Result:		is displayed again.
POWER	DEMO/
	DIMMER
		USB
TIMER	TIMER/CLOCK	PROGRAM/SET
ON/OFF
SLEEP	REP A-B	REPEAT
MO/ST	COUNT RESET	TAPE SPEED
CD SYNC	RDS
	DISPLAY	PTY

21