Samsung MMDB9RH/ELS Listening to a Cassette Tape Counter, Selecting the Cassette Playback Mode

Listening to a Cassette Tape Counter

GB

Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 30.

1	Switch the system on by pressing On/Standby (					).
2	Open the cassette deck by pushing on the corner of the cover
	marked Push Eject (			) until you hear a click and then releasing it.
	Insert the pre-recorded cassette with the open edge of the tape
	facing downwards.
3	Close the deck by pushing on it until it clicks into place.
4
	To listen to...				Press ...
	Side A				Tape (	) button once.
	Side B				Tape (	) button twice.
	Result: The cassette starts playing.
5	Press the	,	button if necessary.
	To...					Press ...
	Rewind the cassette					button.
	Fast-forward the cassette					button.
6	When you have finished playback, press				button.

When playing a cassette in one of the cassette decks, a counter is displayed to enable you to take note of the counter value at the start of each track to start playback at the beginning of the track to which you wish to listen.

Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing Counter Reset on the front panel.

Each cassette deck has a separate counter.

DVD	TUNER	AUX	Mute
	Band
Sleep	Mono/ST	Timer/Clock Timer/On/Off
Rec/Pause	P.Surround	S. Bass	EQ
Tape Mode	Counter Reset	Menu	Open/Close
	DVD/CD/TUNER
Down	Tuning		Up

						Volume
	Color Disply	REC/Pause		TUNER/Band	Power	Sound
	/Demo				Surround	Mode
On/Standby			4	DVD/CD
	1	CD Synchro			Sleep
				TAPE
	AUX	CD Repeat			Mono/ST	Open/Close
						S.Bass
		5		Tuning Mode	5	Level
						Multi Jog
Phones			VD/MP3-CD/CD-R/RW PLAYBACK
				6
MIC	MIC Mixing

Selecting the Cassette

Playback Mode

Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically.

Press Tape Mode until the appropriate symbol is displayed.

When the display indicates... The micro component system plays

back...

One side of the selected cassette and then stops.

One side of the cassette.

The other side of the cassette and then stops.

Both sides of the cassette indefinitely until you press stop.

DVD

Sleep

TUNER	AUX	Mute
Band
Mono/ST	Timer/Clock Timer/On/Off

Rec/Pause	P.Surround	S. Bass	EQ
Tape Mode	Counter Reset	Menu	Open/Close
	DVD/CD/TUNER
Down	Tuning		Up

24