Where to Install Your

Mini-Compact System

To take full advantage of your new mini-compact system, follow these installation instructions before connecting the unit.

Install the system on a flat, stable surface.

Never place this unit on carpeting.

Never place this unit in an outdoor area.

Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.

Make sure that you have enough room to open the compact disc compartment easily.

Place the loudspeakers at a reasonable distance on either side of the system to ensure good stereo sound.

Direct the loudspeakers towards the listening area.

For optimum performance, make sure that both speakers are placed at an equal distance above the floor.

Volume

Color Display

REC/Pause

TUNER/Band

Power

Sound

/Demo

 

Surround

Mode

On/Standby

 

VCD/CD

 

 

 

CD Synchro

Sleep

 

 

 

 

AUX

 

TAPE

 

Open/Close

CD Repeat

 

Mono/ST

 

 

 

 

S.Bass

 

 

Tuning Mode

 

Level

Multi Jog

Phones

VCD/MP3-CD/CD-R/RW PLAYBACK

 

MIC

MIC Mixing

Connecting your System to the Power Supply

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the voltage.

1

Check the position of the voltage selector on the rear of the system

2

(OPTIONAL).

Plug the main lead (marked AC Cord on the rear of the system) into

3

an appropriate socket.

Press the on/standby button to switch your mini-compact system on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Inserting Remote Control Batteries

GB

Insert or replace remote control batteries when you:

Purchase the mini-compact system

Find that the remote control is no longer operating correctly

When replacing the batteries, use a new set of batteries and never mix alkaline and manganese batteries.

1

Place your thumb on the position marked on the battery

 

compartment cover (rear of the remote control) and push the cover in

 

the direction of the arrow.

2

Insert two AA, LR06 or equivalent batteries, taking care to respect

 

the polarities:

 

+ on the battery against + in the battery compartment

 

– on the battery against – in the battery compartment

3

Replace the cover by sliding it back until it clicks into position.

If you will not be using the remote control for a long time, remove the batteries to prevent corrosion.

7