Programming the Order of Playback

GB

You can decide:

The order of the track desired to listen

The track not desired to listen

A maximum of up to 30 order of tracks desired to listen may be programmed.

Before selecting the track, the CD player should be stopped.

This function may be used simultaneously with the CD Repeat function.

1

If the CD function is selected, stop the player by pressing

 

 

.

 

 

2

Load the selected CDs.

 

 

 

 

 

 

 

 

 

3

Press Program/Set.

 

 

 

 

 

 

 

 

 

 

Result: The following indications are displayed:

 

 

 

 

 

 

 

 

(01 = Program no., – – – = Track no. on the disc)

 

4

Select the required track by pressing:

 

 

 

 

 

 

 

 

to move back through the tracks

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

to move forward through the tracks

 

 

 

 

 

 

 

 

 

 

 

 

Press Program/Set to confirm your selection.

 

 

 

 

 

 

Result: The selection is stored and is displayed.

 

 

 

 

 

6

To select other tracks, repeat Steps 5 to 6.

 

 

 

 

 

7

Press VCD/CD (

 

 

 

) to listen to the track selection in the order

 

 

 

 

 

 

 

 

programmed.

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To...

 

 

Press...

 

 

 

 

 

 

Listen to the current track again

 

 

 

once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Listen to the previous track

 

 

 

twice

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Listen to the next track

 

 

 

once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Skip forwards or backwards

 

 

 

or

 

the appropriate

 

 

 

 

 

one or more tracks

 

 

number of times

 

9

To cancel the selection, press

 

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once if the compact disc player is stopped

Result: PRGM is no longer displayed.

If you open the compartment, the selection is cancelled.

You can use the Multi Jog to instead / button in step

4,8.

1, 9

Checking or Changing Programmed Tracks

You can check or change your selection of tracks at any time.

1

Press

 

once if you have started listening to the selection.

 

 

2

Press Program/Set.

 

Result: The following indications are displayed:

(01 = Program no., – – – = Track no. on the disc)

If you have already programmed 30 tracks, Check is displayed instead of PR when you press Program/Set.

3 Press Program/Set one or more times until the track to be changed

is displayed.

 

 

4 Press

/

or turn Multi Jog to select a different track.

5 Press Program/Set to confirm your change.

6 Press VCD/CD (

) to start listening to the selection.

Result: The first track selected is played.

TUNER/Band

Power

Sound

Surround

Mode

 

 

 

VCD/CD

Sleep

 

 

 

 

 

TAPE

 

Open/Close

4

 

Mono/ST

 

S.Bass

 

 

Tuning Mode

4

Level

 

 

Multi Jog

 

1

 

 

 

4

VCD/MP3-CD/CD-R/RW PLAYBACK

1 4

4

6

4,8

4,8

7

3,5

2,3,5

14