Programming the Order of Playback

(This function is not available during playback of an MP3-CD.)

GB

You can decide:

The order of the track desired to listen

The track not desired to listen

 

A maximum of up to 24 order of tracks desired to listen

 

may be programmed.

 

Before selecting the track, the CD player should be stopped.

 

This function may be used simultaneously with the CD

 

Repeat function.

 

In the case of the MP3-CD, the PROGRAM/SET button

 

may be used as the RESUME ON, OFF function.

 

 

 

 

1

If the CD function is selected, stop the player by pressing

 

button.

 

 

2

Load the selected CD.

3

Press PROGRAM/SET.

 

Result: The following indications are displayed:

 

 

 

(01 = Program no., -- -- = Track no. on the disc)

4

Select the required track by pressing:

 

 

 

 

 

 

 

 

to move back through the tracks

 

 

 

 

 

5

 

 

to move forward through the tracks

 

 

 

 

 

 

 

 

 

 

Press PROGRAM/SET to confirm your selection.

 

 

Result: The selection is stored and

 

 

is displayed.

6

To select other tracks, repeat Steps 4 to 5.

 

 

7

Press CD (√/») to listen to the track selection in the order programmed.

8

To...

 

 

Press...

 

 

 

Listen to the current track again

 

 

 

 

once

 

 

 

 

 

 

 

 

 

 

Listen to the previous track

 

 

 

 

twice

 

 

 

 

 

 

 

 

 

 

Listen to the next track

 

 

 

 

once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Skip forwards or backwards

 

 

 

 

or

 

the appropriate

 

 

 

 

 

 

one or more tracks

 

 

number of times

9

To cancel the selection, press

 

button.

 

 

 

 

 

 

 

 

Once if the compact disc player is stopped

Result: PROG is no longer displayed.

If you open the compartment, the selection is cancelled.

3,5

4,8

1, 9

4,8

 

 

 

7

Checking or Changing Programmed Tracks

You can check or change your selection of tracks at any time.

1

Press

 

once if you have started listening to the selection.

 

 

2

Press PROGRAM/SET button twice.

 

Result: The following indications are displayed:

(01 = Program no., – – = Track no. on the disc)

If you have already programmed 24 tracks, Check is displayed instead of CH when you press PROGRAM/SET.

3

Press PROGRAM/SET one or more times until the track to be

 

changed is displayed.

4

Press

 

or

 

to select a different track.

 

 

 

 

5

Press PROGRAM/SET to confirm your change.

6

Press CD (√/») to start listening to the selection.

Result: The first track selected is played.

 

 

 

 

 

 

2,3,5

41 4 6

14