3.12 Maintenance

Cleaning the document scanner
To keep your machine working properly, occasionally clean the white roller,
ADF rubber, and the scanning glass. If they are dirty, documents sent to
another fax machine will not be clear.
1. Open the control panel with hand.
3. Disassemble the white roller as follows:
Both ends of the white roller have plastic bushings that are snapped shut
with small tabs on them. Pull the bushing slightly inward (A) , then
rotate the bushing (B) until it reaches a slot. Then pull the roller upward.
A
B
4. Wipe the roller surface with a soft cloth dampened with water.
busing
2. Flip up the control panel latch in front of the left side arm to hold the
control Panel open.