Basic Functions

Setting the Clock

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1.Switch the system on by pressing the

STANDBY/ON ( ) button.

2.Press and hold TIMER/CLOCK button and then press the ENTER button.

Result: "CLOCK" is displayed.

3.Press ENTER.

Result: The hour flashes. `` Decrease the hours: _ `` Increase the hours: +

4.When the correct hour is displayed, press

ENTER.

Result: The minutes flashes.

`` Decrease the minutes: _

`` Increase the minutes: +

5.When the correct hour is displayed, press

ENTER.

Result: "TIMER" appears in the display.

`` The current time is now set.

✎✎NOTE

`` You can display the time, even when you are using another function, by pressing and hold the TIMER/CLOCK button once.

`` You can also use [ or ] on the front panel instead of buttons in step 3,4.

Timer Function

The timer enables you to switch the system on or off at specific times automatically.

`` Before setting the timer, check that the current time is correct.

`` For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

`` If you no longer want the system to be switched on or off automatically, you must cancel the timer.

Example: You wish to wake up to music every morning.

1.Switch the system on by pressing the

STANDBY/ON ( ) button.

2.Press and hold the TIMER/CLOCK button and then press _ or + buttons until TIMER is displayed.

3.Press the ENTER ( ) button.

Result: ON TIME is displayed for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

444Set the timer switch-on time.

aPress the _ or + button.

bPress the ENTER ( ) button. Result: The minutes flash.

cPress the _ or + button.

dPress the ENTER ( ) button.

Result: OFF TIME is displayed for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time.

555Set the timer switch-off time. a Press the _ or + button.

b Press the ENTER ( ) button.

Result: The minutes flash.

cPress the _ or + button.

dPress the ENTER ( ) button. Result: VOL XX is displayed, where XX

corresponds to the volume already set.

666Press _ or + button to adjust the volume level

and press the ENTER ( ) button.

Result: The source to be selected is displayed.

777Press the _ or + button to select the desired source to be played when the system switches on.

`` FM (radio) : a Press the ENTER ( ) button. b Select a preset station by press

the _ or + button.

`` DVD/CD (compact disc): Load one or more compact discs.

`` TAPE(cassette): insert a cassette tape.

`` USB: Connect the USB device.

30 English