Listening to Radio

Using buttons on the Remote Control

1.Press the FUNCTION button to select FM or AM band.

2.Tune in to the desired station.

•Preset Tuning : Press the STOP button to select PRESET and then press TUNING () buttons to select the preset station.

•Automatic Tuning : Press the STOP button to select MANUAL and then press and hold the TUNING () button to automatically search for active broadcasting stations.

•Manual Tuning : Press the STOP button to select MANUAL and then briefly press the TUNING () button to increase or decrease the frequency.

Using buttons on the product

1.Press the TUNER/AUX button to select FM or AM band.

2.Select a broadcast station.

•Preset Tuning : Press the STOP ( @ ) button to select PRESET and then press the

[ ] buttons to select the preset station.

•Automatic Tuning : Press the STOP ( @ ) button to select MANUAL and then press and hold the [ ] buttons to automatically search the band.

•Manual Tuning : Press the STOP ( @ ) button to select MANUAL and then press the [ ] buttons to tune in to a lower or higher frequency.

Setting Mono/Stereo

Press the MO/ST button.

• Each time the button is pressed, the sound switches between STEREO and

MONO.

•In a poor reception area, select MONO for a clear, interference-free broadcast.

✎✎NOTE

`` This applies only when listening to an FM station.

`` This product may not support the AM function depending on your region.

Presetting Stations

Example : Presetting FM 89.10 in the memory

1.Press the FUNCTION button to select FM or AM band.

2.Press the STOP ( @ ) button to select <MANUAL> mode.

3.Press the TUNING () buttons to select <89.10>.

4.Press the ENTER button.

•Number flashes on the display.

5.Press the TUNING () buttons to select preset number.

•You can select between 1 and 15 presets.

6.Press the ENTER button again.

•Press the ENTER button before number disappears from the display.

•Number disappears from the display and the station is stored in memory.

7.To preset another station, repeat steps 2 to 6.

•To tune in to a preset station, press the TUNING () to select a channel.

✎✎NOTE

`` You can also use the [, ] buttons on the front panel instead of the TUNING () buttons in step 3,5,7.

Functions Basic 04

English 27