Basic Functions
Setting the Clock
For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1.Switch the system on by pressing the
POWER ( 
) button.
2. Press and hold the TIMER/CLOCK button and then press the ENTER button.
Result: "CLOCK" is displayed.
3.Press the ENTER button.
Result: The hour flashes.
`` Decrease the hours: %
`` Increase the hours: $
4.When the correct hour is displayed, press the ENTER button.
Result: The minutes flashes.
`` Decrease the minutes:%
`` Increase the minutes: $
5.When the correct minute is displayed, press the ENTER button.
Result: "
TIME" appears in the display.
`` The current time is now set.
✎✎NOTE
`` You can display the time, even when you are using another function, by pressing and hold the TIMER/CLOCK button once.
`` You can also use [ or ] on the front panel instead of %,$ buttons in step 3,4.
Timer Function
The timer enables you to switch the system on or off at specific times automatically.
`` Before setting the timer, check that the current time is correct.
`` For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
`` If you no longer want the system to be switched on or off automatically, you must cancel the timer by
pressing the TIMER ON/OFF button.
Example: You wish to wake up to music every morning.
1.Switch the system on by pressing the
POWER ( ) button.
2. Press and hold the TIMER/CLOCK button and then press the $ or % buttons until 
TIME is displayed.
3.Press the ENTER button.
Result: ON is displayed for a few seconds, you can set the timer
4.Set the timer switch-on time.
aPress the $ or % button.
bPress the ENTER button. Result: The minutes flash.
cPress the $ or % button.
dPress the ENTER button.
Result: OFF is displayed for a few seconds, you can now set the timer
5.Set the timer
Result: The minutes flash.
cPress the $ or % button.
dPress the ENTER button.
Result: VOL XX is displayed, where XX corresponds to the volume already set.
6.Press $ or % button to adjust the volume level and press the ENTER button.
Result: The source to be selected is displayed.
7.Press the $ or % button to select the desired source to be played when the system switches on.
`` FM/AM (radio) : a Press the ENTER button.
b Select a preset station by press the $ or % button.
`` DVD/CD (compact disc): Load one audio CD.
`` USB : Connect the USB device.
8.Press the ENTER button.
Result: CHKREC (Do you want to record?) is displayed.
9.Press the ENTER button.
Result: REC N is displayed, you can press the $ or % button to select the REC Y or REC N, and then press ENTER button.
1). If you select the REC N, it will cancel tuner timing recording even if you have already set the tuner timing recording.
2). If you select the REC Y, you can set the tuner timing recording.
a.Press the ENTER button.
Result: ON is displayed for a few seconds, you can set the tuner timing recording
b.Press the ENTER button.
Result: OFF is displayed for a few seconds, you can set the tuner timing recording
✎✎NOTE
`` The maximal tuner timing recording time is 5 hours. `` If the timer switch on and off times are identical, the
word ERROR is displayed.