Description
Rear Panel
7
6
1 | 2 | 3 | 4 | 5 |
1.FM Antenna Connector Terminal
1.Connect the FM antenna to the FM antenna con- nector terminal.
2.Slowly move the antenna wire around until you find a location where reception is good, then fas- ten it to a wall or other rigid surface.
3.If reception is poor, you may need to install an outdoor antenna. To do so, connect an outdoor FM antenna to the FM antenna connector terminal of the product using a 75Ω coaxial cable (not supplied).
2.ONLY FOR SERVICE
•This jack is just for testing, please don't use it.
3.AUX IN 2 Terminals
1.Use the Audio Cable (not supplied) to connect AUX IN 2 on the product to Audio Out on the external analog output device.
•Be sure to match connector colors.
•If the external analog output device has only one Audio Out jack, connect either left or right.
•Press the TUNER/AUX button to select the AUX 2.
•If no button actions for more than 8 hours in AUX mode, the power will automatically turn off.
4.LED Terminals for Speaker Beat Waving.
5.2.2 CH Speaker Terminals
The speakers connector terminals are located on the rear of the product.
1.To achieve the correct sound quality, insert those speaker connectors to the same color of the speaker terminals system.
•LEFT channel (marked L , White/Purple).
•RIGHT channel (marked R , Red/Purple).
•Don't plug in the Purple SUBWOOFER connector to White or Red terminal by force.
6.POWER
•Insert only the provided power cable.
7.Cooling fan
•The fan operates while the unit is powered on. If set to the minimum volume, the fan won't operate.
Secure a minimum 10 cm of clear space from all sides of the fan when installing the product.
6 English