2.In some cases, you will be asked to power the drive OFF/ON depending on the firmware update type. If the power OFF/ON process is displayed, press [Y] to confirm.
NOTE: To Power OFF/ON the SSD, you must open the computer case to gain physical access to the drive. Disconnect its power cable, wait a few seconds, and reconnect the power cable.
Secure Erase Utility
Q 1: Why is the Secure Erase Utility application taking a long time to open?
A 1: The software tries to detect all disks connected to the system when it is launched. This may require a few minutes, depending on the hardware platform and the number of disks connected to the system.
Q 2: Why doesn’t the Secure Erase Utility automatically launch when I boot
from a USB disk into DOS?
A2: There are a number of reasons why this could happen, but the problem
is easily remedied by following the steps below:
1. If the Secure Erase Utility does not automatically start after restarting the computer, you may be presented with a DOS screen.
Because the Boot Priority has been set to the USB drive first, the USB disk is detected as drive C. The executable files and data files for the Secure Erase Utility are stored in the SAMSUNG folder (directory).
Perform the following steps. Please do NOT include the quotation marks.
A.Type “cd samsung” and press [ENTER] at the command prompt.
B.Type “cd secureerase” and press [ENTER] at the next command prompt.
52