4 Select Internet Protocol Version 4(TCP/IPv4) from the list of Network Components and click Properties.

5 Configure the IP settings.

When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually.

The Network Component name may differ depending on the Operating System Installed.

To add a network component, click Install in the screen shown in the figure above. You can add clients, services, and protocols.

When not using DHCP, ask your network administrator for the IP address.

6 When you have completed the settings, click the OK button.

The network settings have been completed.

73