Configuring Network Environment

Configure the Wireless Network Adapter as follows:

1.Click Start > Control Panel > Network and Internet Connections

2.Click icon (Network Connections)

3.Double-click the Wireless Network Connection icon. The Connect to Wireless Network window pops up.

General Office Net

Supervisor Office Net

4.Select one of the available networks in the Available networks section, if displayed.

No networks are displayed

Office - Consult your system administrator.

Home - Verify your access point is working properly.

5.Click the Connect button. The Wireless Network Connection icon in the control panel will show your connection is Enabled. You may proceed using the network as normal wired LAN connections.

Change Wireless Network Access Point as follows:1.Right-click the Wireless Network Connection icon.

2.Click View Available Wireless Networks. The Connect to Wireless Network window pops up.

3.Select the new network from the available networks in the Available networks section, if displayed.

4.Click Connect button. The Wireless Network Connection icon in the control panel will show your connection is Enabled. You may proceed using the network as normal wired LAN connections

28 Users Manual