Swap a Flex-Bay Device - Power On

You can use the Softex Bay Manager utility to hot-swap your devices in the flex-bay.

To start the Softex Bay Manager utility:

1.Click Start > Control Panel > Other Control Panel Options > Softex Bay Manager.

- or -2.Double-click the SwapBay icon in the Windows taskbar.

Device Swap

To swap a device with the power on proceed as follows:1.Start the Softex Bay Manager Utility.

You do not have to turn the computer over or tip it on its side to change devices. Simply tilt the computer up about 10 cm at the back and locate the Flex-Bay latch. See Figure below for the location of the Flex-Bay latch. The computer in the figure is turned over for clarity.

Flex-Bay Latch

2.Click Remove / Swap. A Device Change popup window stating, “Please wait until the system processes the device change” appears then another popup window appears and says, “Please remove or swap your bay device(s) now and press OK.”

3.Tilt the computer up & locate the smart bay latch.4.Slide and hold the device latch toward the rear of the computer.

30 Users Manual