There is LCD or CRT has noise (speckles, lines or raged edges) on the picture when playing a MPEG file with the Media player/ DVD software or using the USB camera.
Adjust the resolution and the colour to 1400 x 1050 and 32 bit to display clearly, or avoid playing two programs at the same time.
In DOS mode the CRT/LCD | The LCD only mode is not supported using this Key |
button does not work. | combination. |
|
|
If the connected CRT | If the refresh rate is not optimal for the connected |
monitor display is not steady. | CRT, then this problem may occur. |
| To correct this problem do the following: |
2.
4.Click the Advanced button.
5.Click the Adapter tab
6.Adjust the Refresh rate to optimal or other selections until you see the CRT clearly.
Modem Problems
ProblemAction
My modem doesn't connect to services or disconnects during communication
If your modem has difficulty in connecting to online services and sustaining communications, first check if other devices are connected and remove them. Also remove any extension leads. Interference from certain devices or poor line power conditions may degrade the quality of your connection. Under these conditions gradually reduce the communication speed of your modem until a reliable connection is achieved.
Check with your
76 Users Manual