To reset the system to Single View mode:

1.Start Display properties.2.Click Settings tab.3.Click the second monitor among two monitor pictures.4.Uncheck Extend my Windows desktop onto this monitor.5.Click OK.

Using Multimonitor Mode

You may duplicate your LCD screen on an external monitor, television or digital flat panel.

TV Connection Restrictions:

You should only connect/disconnect cables and wires to your computer and TV when the power is off.

TV Support Limitations:

The computer will only support televisions with S-VHS input capability. The standard composite video in port is not supported.

You can not use TV-out port to connect to your television in DOS mode. When TV-Out is activated, your computer screen will not be active.

To start using multimonitor mode proceed as follows:1.Connect the external monitor to the connection on the back of your computer.

2.Press the <Fn+F4> key combination, the LCD will be duplicated on the monitor, television or digital flat panel.

<Fn+F4> key combinations

Each time you use the <Fn+F4> key combination the LCD/Monitor combination changes as follows:

•Both displays are displaying the computer output (LCD & Monitor).

•Monitor, television or digital flat panel only is displayed the computer output.

•LCD only is displaying the computer output.

66 Users Manual