Using the TPM Security Device (Optional)

Chapter 3. 67

Using the computer

When the system reboots, press the corresponding key(s) by

 

5 following the onscreen instructions.

Installing the TPM program

 

You can install the TPM program as follows.

 

When the computer restarts automatically and the Samsung

6 logo screen appears, press the F2 key repeatedly.

7

Select the Security > TPM Configuration > Change TPM

Status item and set the item to Enable and Activate.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Aptio Setup Utility

 

 

 

 

 

 

 

 

Security

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TPM Configuration

 

 

 

 

 

TPM Support

 

[Enabled]

 

 

 

 

 

Change TPM Status

 

[

No Change

]

 

 

 

 

 

Security Chip State

 

 

Disabled and Deactivated

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No Change

 

 

 

 

 

 

 

 

Clear

 

 

 

 

 

 

 

 

Enable and Activate

 

 

 

 

 

 

 

 

Disable and Deactivate

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8 Press the F10 key to save the changes.

 

When the system reboots, press the corresponding key(s) by

9 following the onscreen instructions.

10Press the F10 key to save the changes. The computer automatically restarts. Initialization of the TPM chip has been completed. Now, install the TPM program and register the TPM program.

This program is only provided for models with Recovery and the TPM function.

Method 1

1 Run Recovery and click on System Software.

-If your computer does not boot up or if System Software does not display in the Recovery program, use Method 2 to install the TPM program.

2

Click on System Software Installation.

3

The SW Update program will be launched.

Select TPM Host SW and click Install Now.

 

If the system software media is supplied with the product,

 

you can install the program by using the system software

 

media (only when supplied.)

4

After the installation, if you click OK, the computer restarts.