Samsung NP600B4CA01US appendix When the virtual drive PSD does not appear

Using the TPM Security Device (Optional)

When the virtual drive (PSD) does not appear	2
You can only use the virtual drive (PSD) when you have selected	3
the Personal Secure Drive (PSD) option during the program
registration.

If you have not selected the option during the registration, complete the following steps.

1	Click start > All Programs > Infineon Security Platform
	Solution > Manage Security Platform and click the User

Settings tab > Security Platform Features and then

Configure.

Chapter 2. 80

Using the computer

In the load window, enter the basic user password and click OK.

If you click Start > Computer, you will be able to confirm that the Personal Secure Drive is created.

Note that when you have copied confidential data to the PSD, the original data files are not encrypted.

2	When the Initialization Wizard appears, select Personal
	Secure Drive (PSD) and enter the user password.
3	Click Next several times according to the instructions of the
	Initialization Wizard to finish the wizard.

When the virtual drive (PSD) is not loaded

To use the virtual drive (PSD), the virtual drive (PSD) should be loaded first. If it is not loaded, you can load it according to the procedures below.

1 Right-click over the Security Platform icon in the system tray of the Taskbar and select Personal Secure Drive > Load from the pop-up menu.

When you have to register again (to erase the authentication information on the TPM chip)

To register a user again, you need to delete the existing authentication information saved on the TPM chip and then clear the TPM chip.

Register the user in the following order.

1	Delete the virtual drive.
2	Delete the existing authentication information saved on the
	TPM chip.