Samsung NP700Z7C-S03US manual Using the TPM Security Device Optional, Installing the TPM program

Using the TPM Security Device (Optional)

Chapter 3. 73

Using the computer

5

6

When the system reboots, press the corresponding key(s) by following the onscreen instructions.

When the computer restarts automatically and the Samsung logo screen appears, press the F2 key repeatedly.

Installing the TPM program

You can install the TPM program as follows. Install the program according to the procedures below.

7	Select the Security > TPM Configuration > Change TPM
	Status item and set the item to Enable and Activate.
			Aptio Setup Utility
					Security
			TPM Configuration
		TPM Support		[Enabled]
		Change TPM Status		[	No Change	]
		Security Chip State			Disabled and Deactivated
					No Change
					Clear
					Enable and Activate
					Disable and Deactivate
8 Press the F10 key to save the changes.
	When the system reboots, press the corresponding key(s) by
9 following the onscreen instructions.

10Press the F10 key to save the changes. The computer automatically restarts. Initialization of the TPM chip has been completed. Now, install the TPM program and register the TPM program.

	This program is only provided for models with Recovery and
	the TPM function.
1	Run Recovery and click on System Software.
2	Click on System Software Installation.
3	The SW Update program will be launched.
	Select TPM Host SW and click Install Now.
	If the system software media is supplied with the product,
	you can install the program by using the system software
	media (only when supplied.)
4	After the installation, if you click OK, the computer restarts.